/////////////////////////////////////////////////////////////////////////////
//      		    	 系统
// IR_gardensSoft.mnu  ---------------------------------------- 菜单文件
// 创建时间   2005.5.19
// 版本4.5
/////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////
// Begin Menus

***MENUGROUP=IR_gardensSoft

//
//   Begin AutoCAD Digitizer Button Menus
//
***BUTTONS1
// Simple + button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1) is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=IR_gardensSoft.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
// Shift + button
$P0=SNAP $p0=*

***BUTTONS3
// Control + button

***BUTTONS4
// Control + shift + button

//
//   Begin System Pointing Device Menus
//
***AUX1
// Simple button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1, the "right button")
// is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=IR_gardensSoft.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T


***AUX2
// Shift + button
$P0=SNAP $p0=*
$P0=SNAP $p0=*

***AUX3
// Control + button
$P0=Layer $p0=*

***AUX4
// Control + shift + button
$P0=TOOL $p0=*

//
//   Begin AutoCAD Pull-down Menus
//
***POP0
**SNAP
// Shift-right-click if using the default AUX2 and/or BUTTONS2
// menus.
             [对象捕捉光标菜单(&O)]
ID_Tracking  [临时追踪点(&K)]_tt
ID_From      [自(&F)]_from
ID_MnPointFi [->点过滤器(&T)]
ID_PointFilx   [.X].X
ID_PointFily   [.Y].Y
ID_PointFilz   [.Z].Z
         [--]
ID_PointFixy   [.XY].XY
ID_PointFixz   [.XZ].XZ
ID_PointFiyz   [<-.YZ].YZ
             [--]
ID_OsnapEndp [端点(&E)]_endp
ID_OsnapMidp [中点(&M)]_mid
ID_OsnapInte [交点(&I)]_int
ID_OsnapAppa [外观交点(&A)]_appint
ID_OsnapExte [延长线(&X)]_ext
             [--]
ID_OsnapCent [圆心(&C)]_cen
ID_OsnapQuad [象限点(&Q)]_qua
ID_OsnapTang [切点(&G)]_tan
             [--]
ID_OsnapPerp [垂足(&P)]_per
ID_OsnapPara [平行线(&L)]_par
ID_OsnapNode [节点(&D)]_nod
ID_OsnapInse [插入点(&S)]_ins
ID_OsnapNear [最近点(&R)]_nea
ID_OsnapNone [无(&N)]_non
             [--]
ID_Osnap     [对象捕捉设置(&O)...]'_+dsettings 2

**Layer 
[--]
ID_OnallLayer			     [显示全部层]^C^C^P_ONALLLAYER
ID_OnoneLayer			     [显示指定层]^C^C^P_ONONELAYER
ID_OffoneLayer			     [关闭指定层]^C^C^P_OFFONELAYER
ID_SeloneLayer			     [设定当前层]^C^C^P_SELONELAYER
ID_attachLayer			     [归属指定层]^C^C^P_ATTACHLAYER
ID_UniteLayer			     [合并相关层]^C^C^P_UNITELAYER
ID_DecomposeLayer		     [分解相关层]^C^C^P_DECOMPOSELAYER
ID_DeleteLayer			     [删除指定层]^C^C^P_DELETELAYER
ID_MemoryLayer			     [层显示记忆]^C^C^P_MEMORYLAYER
[--] 
ID_DrawRoad			     [道路绘制]^C^C^P_DRAWROAD
ID_LookforRoadData		     [查看道路]^C^C^P_LOOKFORROADDATA
ID_CreatePolt			     [地块生成]^C^C^P_CREATEPOLT
ID_RedLineBack			     [红线回退]^C^C^P_REDLINEBACK
ID_DrawArch		             [绘制建构筑]^C^C^P_DRAWARCH
ID_FillDim			     [图案填充标注]^C^C^P_FILLDIM
ID_CalHatchArea			     [面积统计标注]^C^C^P_CALHATCHAREA
[--]
ID_InsertPMTree			     [平面树]^C^C^P_INSERTPMTREE
ID_InsertPMLamp			     [平面灯]^C^C^P_INSERTPMLAMP
ID_InsertPMCar			     [平面车]^C^C^P_INSERTPMCAR
[--]


**TOOL
[--]
ID_ConvergeEntity		     [线段聚合]^C^C^P_CONVERGEENTITY
ID_DrawgardensLine		     [绘制线]^C^C^P_DRAWGARDENSLINE
ID_PEditFPLine			     [线拟合]^C^C^P_PEDITFPLINE
ID_ModifyCircleRadius		     [半径修改]^C^C^P_MODIFYRADIUS
ID_ClipCircleangle		     [倒圆切角]^C^C^P_CLIPCIRCLEANGLE
ID_TransVCircelAngle		     [圆切转换]^C^C^P_TRANSVCIRCELANGLE
ID_LinebothOffest		     [直线双偏移]^C^C^P_LINEBOTHOFFEST
ID_LineteamOffest		     [直线组偏移]^C^C^P_LINETEAMOFFEST
ID_DrawOutlineOfPLine		     [多义线挖空]^C^C^P_OUTLINEOFPLINE
[--]
ID_lineweightAdjust		     [线宽调整]^C^C^P_LINEWEIGHTADJUST
ID_TextAdjust			     [字高调整]^C^C^P_TEXTADJUST
ID_FillColorPattern	             [特殊填充色块]^C^C^P_FILLCOLORPATTERN
ID_EditFillHatch		     [填充图案编辑]^C^C^P_EDITFILLHATCH
ID_MakeNoNameBlock		     [制作无名块]^C^C^P_MAKENONAMEBLOCK
ID_disposeAlongline		     [沿线布置]^C^C^P_DISPOSEALONGLINE
ID_ReplaceBlock			     [块替换]^C^C^P_REPLACEBLOCK
ID_ScaleBlock			     [块缩放]^C^C^P_SCALEBLOCK
ID_calBlockNum			     [块统计]^C^C^P_CALBLOCKNUM
ID_ZModifyBlockRefColor		     [改块颜色]^C^C^P_MODIFYBLOCKCOLOR
ID_AddDelBlockRefObject		     [编辑块]^C^C^P_ADDDELBLOCKREFOBJECT
[--]
ID_DrawFrontOrder		     [置前显示]^C^C^P_DRAWFRONTORDER
ID_DrawBackOrder		     [置后显示]^C^C^P_DRAWBACKORDER
ID_AdjustDrawOrder		     [调整显示次序]^C^C^P_ADJUSTDRAWORDER
ID_SetZaxiscoordinate		     [Z轴为零]^C^C^P_SETZAXISCOORDINATE
[--]


***POP1
**HCADSYS
[系统(&S)]
[--]
ID_New       			     [新建(&N)...\tCtrl+N]^C^C_new
ID_Open     			     [打开(&O)...\tCtrl+O]^C^C_open
ID_FILE_CLOSE			     [关闭(&C)]
ID_PartialOp 			     [$(if,$(eq,$(getvar,fullopen),0),,~)局部加载(&R)]^C^C_partiaload
            			     [--]
ID_Save                              [保存(&S)\tCtrl+S]^C^C_qsave
ID_Saveas    			     [另存为(&A)...]^C^C_saveas
ID_Export    			     [输出(&E)...]^C^C_export
[--]
ID_SystemInit		             [系统初始化]^C^C^P_SYSTEMINIT
ID_SystemDrawFrame	             [绘制图框]^C^C^P_DRAWFRAME
ID_SetCoordinate	             [设置坐标]^C^C^P_SETCOORDINATE
ID_DrawCoorNet		             [绘制坐标网]^C^C^P_DRAWCOORNET 
ID_InsertNorthPin		     [指北针]^C^C^P_INSERTNORTHPIN
ID_Insertscale			     [比例尺]^C^C^P_INSERTSCALE
ID_InsertWindowrose		     [风玫瑰]^C^C^P_INSERTWINDOWROSE
ID_ShowHideUCSICON	             [UCS图标开关]^C^C^P_SHOWHIDEUCSICON
ID_Toolbar   			     [工具栏]^C^C_toolbar
ID_HCADShortCut			     [热键自定义]^C^C_HCADSHORTCUT
ID_HCADMenuBar			     [窗口菜单]^C^C^P_HCADMENU
[--]
ID_OpenTemplateDrawing		     [学习样图]^C^C^P_OPENTEMPLATEDRAWING
[--]
ID_MenuShiftCADFunc		     [切换到ACAD菜单]^C^C^P_MENUSHIFTCAD
[--]
ID_APP_EXIT 			     [退出(&X)]^C^C_quit


***POP2
**HCADROAD
[道路(&R)]
[--]
ID_DrawRoad			     [道路绘制\tCtrl+D]^C^C^P_DRAWROAD
[->道路喇叭口]
ID_DrawRoadBugle		     [绘制喇叭口]^C^C^P_DRAWROADBUGLE
ID_DelRoadBugle			     [<-删除喇叭口]^C^C^P_DELROADBUGLE
[->道路车港]
ID_DrawRoadHarbor		     [绘制车港]^C^C^P_DRAWROADHARBOR
ID_DelRoadHarbor		     [<-删除车港]^C^C^P_DELROADHARBOR
[->分隔带]
ID_DrawVirescentceBelt		     [逐个绘制]^C^C^P_DRAWFGD
ID_DDrawVirescentceBeltAuto	     [自动绘制]^C^C^P_DRAWFGDAUTO
[--]
ID_BeltSinglelineTrim		     [单线修剪]^C^C^P_BELTSINGLELINETRIM
ID_BeltTwolineTrim		     [双线修剪]^C^C^P_BELTTWOLINETRIM
[--]
ID_FillBelt			     [<-分隔带填充]^C^C^P_FILLBELT
ID_DisposeTreeOnTheWay		     [沿路布置树]^C^C^P_DISPOSETREEONTHEWAY
ID_DisposeTreeOnTheLine		     [沿线布置树]^C^C^P_DISPOSETREEONTHELINE
[--]
ID_CalRoadTotal			     [道路统计]^C^C^P_CALROADTOTAL
ID_LookforRoadData		     [查看道路]^C^C^P_LOOKFORROADDATA
ID_RoadAttrModify		     [属性查询修改]^C^C^P_ROADATTRMODIFY
[--]
ID_ModifyRoadRadius		     [道路圆角修改]^C^C^P_MODIFYROADRADIUS
ID_ModifyCircleRadius		     [半径修改]^C^C^P_MODIFYRADIUS
ID_ClipCircleangle		     [倒圆切角]^C^C^P_CLIPCIRCLEANGLE
ID_TransVCircelAngle		     [圆切转换]^C^C^P_TRANSVCIRCELANGLE
ID_TrimRoad			     [道路修剪]^C^C^P_ROADTRIM
[->道路色块填充]
ID_RoadColorFill		     [色块填充]^C^C^P_ROADCOLORFILL
ID_FillRoadmakeup		     [<-色块补充]^C^C^P_FILLROADMAKEUP
ID_RoadHintFill			     [道路示意填充]^C^C^P_ROADHINTFILL
ID_ShowHideColorFill		     [色块显示开关]^C^C^P_SHOWHIDECOLORFILL
ID_ShowHideHintFill		     [示意显示开关]^C^C^P_SHOWHIDEHINTFILL
ID_ShowHideCenterRoad		     [中心线显示开关]^C^C^P_SHOWHIDECENTERROAD
[--]
ID_DimCurveElement		     [曲线要素标注]^C^C^P_DIMCURVEELEMENT
ID_EditCurveElement		     [曲线要素编辑]^C^C^P_EDITCURVEELEMENT
ID_DrawCurveEleTable		     [曲线要素表]^C^C^P_DRAWCURVEELETABLE
[--]
ID_RoadSchedule			     [道路一览表]^C^C^P_ROADSCHEDULE
ID_DrawTransect			     [道路断面]^C^C^P_DRAWTRANSECT
[--]
ID_DrawRailRoad			     [铁路绘制]^C^C^P_DRAWRAILROAD
[--]


***POP3
**HCADLH
[绿化(&L)]
[--]
ID_DrawdotshapeLawn	             [点状草坪]^C^C^P_DRAWDOTSHAPELAWN
ID_DrawGrassLawn	             [绘制草坪]^C^C^P_DRAWGRASSLAWN
ID_FillGrassLawn	             [填充草坪]^C^C^P_FILLGRASSLAWN
ID_DrawGreenFense	             [绿篱绘制]^C^C^P_DRAWGREENFENSE
ID_CalFenseLen		             [绿篱统计]^C^C^P_CALFENSELEN
[--]
ID_InsertTree		             [单棵树木]^C^C^P_INSERTTREE
ID_DisposeTreeOnTheLine		     [沿线树木]^C^C^P_DISPOSETREEONTHELINE
ID_RegionDisposeTree	             [区域树木]^C^C^P_REGIONDISPOSETREE
ID_ClipTreesuperpose	             [树木重合剪切]^C^C^P_CLIPTREESUPERPOSE
ID_DrawTreeshadow	             [树木阴影绘制]^C^C^P_DRAWTREESHADOW
ID_disposeAlongline		     [图块沿线布置]^C^C^P_DISPOSEALONGLINE
ID_ScaleTreesize	             [树木缩放]^C^C^P_SCALETREESIZE
ID_ScaleBlock			     [图块缩放]^C^C^P_SCALEBLOCK
ID_ReplaceTree			     [树木替换]^C^C^P_REPLACETREE
ID_ReplaceBlock			     [图块替换]^C^C^P_REPLACEBLOCK
ID_FindTree			     [树木查找]^C^C^P_FINDTREE
ID_DimTree			     [树木标注]^C^C^P_DIMTREE
ID_Treeschedule		             [树木统计表]^C^C^P_TREESCHEDULE
[--]
ID_DrawArborFrutex	             [绘制乔灌木]^C^C^P_DRAWARBORFRUTEX
ID_DrawFlower		             [绘制花]^C^C^P_DRAWFLOWER
ID_DrawbambooFlower	             [绘制竹类]^C^C^P_DRAWBAMBOO
[--]
 

***POP4
**HCADYL
[园林(&Y)]
[--]
ID_DrawLineRoad			     [直道绘制]^C^C^P_DRAWLINEROAD
ID_DrawGardensRoad		     [自由小路]^C^C^P_DRAWGARDENSROAD
ID_DrawgravelRoad	             [碎石路]^C^C^P_DRAWGRAVELROAD
ID_DrawStepRoad		             [台阶路]^C^C^P_DRAWSTEPROAD
ID_DrawTingBu		             [汀步]^C^C^P_DRAWTINGBU
ID_DrawBridge		             [桥梁]^C^C^P_DRAWBRIDGE
ID_DrawWaterBank	             [水域]^C^C^P_DRAWWATERBANK
ID_DisLampOnline		     [路灯]^C^C^P_DISLAMPONLINE
[--]
ID_GeneralKickpleat		     [交叉处理]^C^C^P_GENERALKICKPLEAT
ID_NotGeneralKickpleat		     [非常规开叉]^C^C^P_NOTGENERALKICKPLEAT
ID_FillDim			     [图案填充标注]^C^C^P_FILLDIM
ID_EditFillHatch		     [填充图案编辑]^C^C^P_EDITFILLHATCH
ID_CalHatchArea			     [面积统计]^C^C^P_CALHATCHAREA
[--]
ID_DrawDanTuWall		     [路牙绘制]^C^C^P_DRAWDANTUWALL
ID_DrawTravelPorch	             [游廊绘制]^C^C^P_DRAWTRAVELPORCH
ID_DrawArchShinPorch	             [花架绘制]^C^C^P_DRAWARCHSHINPORCH
ID_DrawArchStep		             [台阶绘制]^C^C^P_DRAWARCHSTEP
ID_DrawArchPorch	             [廊柱绘制]^C^C^P_DRAWARCHPORCH
ID_DrawArchFence	             [围墙绘制]^C^C^P_DRAWARCHFENCE
ID_DrawPipeLine		             [管线绘制]^C^C^P_DRAWPIPE
ID_SightAnalyseLine	             [景观分析线]^C^C^P_SIGHTANALYSELINE
[--]


***POP5
**HCADPOLT
[地块(&P)]
[--]
ID_DrawRedLine			     [用地红线]^C^C^P_DRAWREDLINE
[--]
ID_CreatePolt			     [地块生成\tCtrl+Q]^C^C^P_CREATEPOLT
ID_RedLineBack			     [红线回退]^C^C^P_REDLINEBACK
[->地块填充]
ID_FillPlotOfSel		     [选择填充]^C^C^P_FILLSPLOT
ID_FillPlotOfType		     [类别填充]^C^C^P_FILLTPLOT
ID_FillSelAllPlot		     [范围填充]^C^C^P_FILLSELALLPLOT
ID_FillPlot			     [<-全部填充]^C^C^P_FILLPLOT
ID_ShowPlotPattern		     [填充显示开关]^C^C^P_SHOWPLOTPATTERN
ID_QueryPlotAttribute		     [地块属性查询]^C^C^P_QUERYPLOTATTR
ID_PlotAttrDim			     [地块属性标注]^C^C^P_PLOTATTRDIM
[--]
ID_DrawIndexTable		     [指标统计表]^C^C^P_DRAWINDEXTABLE
ID_DrawVillagePlotTable		     [村庄用地计算表]^C^C^P_DRAWVILLAGETABLE
ID_DrawCityPlotTable		     [集镇用地计算表]^C^C^P_DRAWCITYTABLE
ID_DrawHabitPlotTable		     [居住区用地平衡表]^C^C^P_DRAWHABITTABLE
ID_DrawCityBuildPoltTable	     [城市建设用地平衡表]^C^C^P_DRAWCITYBPOLTTABLE
ID_DrawAllPlotCollect		     [总体规划用地汇总表]^C^C^P_DRAWALLCOLLECT
[--]
ID_LegalDrawRole		     [制作图则]^C^C^P_LEGALDRAWROLE
ID_ParkSave			     [部分保存]^C^C^P_PARKSAVE
[--]

***POP6
**HCADARCH
[建筑(&A)]
[--]
ID_DrawArch		             [绘制建构筑\tCtrl+3]^C^C^P_DRAWARCH
ID_singleArchInsert	             [单体建筑调用]^C^C^P_SINGLEARCHINSERT
ID_QueryModifyArch	             [属性查询修改]^C^C^P_QUERYMODIFYARCH
ID_CalArchArea		             [建构筑一览表]^C^C^P_CALARCHAREA
ID_FillArch		             [建筑填充]^C^C^P_FILLARCH
[--]
ID_DrawTurnAround	             [绘制回车场]^C^C^P_DRAWTURNAROUND
ID_DrawPark		             [绘制停车场]^C^C^P_DRAWPARK
ID_DispCarOnline	             [沿线停车]^C^C^P_DISPCARONLINE
[--]


***POP7
**HCADThreeD
[三维(&D)]
[--]
ID_TRANSTHREEDIMEN		     [三维转换]^C^C^P_TRANSTHREEDIMEN
ID_StartThreeDimenbar		     [三维视角]^C^C^P_THREEDIMENBAR
ID_SetArchThickness		     [设置高度]^C^C^P_SETARCHTHICKNESS
ID_ZaxisCopy			     [垂直复制]^C^C^P_ZAXISCOPY
ID_ZaxisMove			     [垂直移动]^C^C^P_ZAXISMOVE
[--]
ID_InsertSWTree			     [三维树]^C^C^P_INSERTSWTREE
ID_InsertSWPerson		     [三维行人]^C^C^P_INSERTSWPERSON
ID_InsertSWLamp			     [三维路灯]^C^C^P_INSERTSWLAMP
ID_InsertSWCar			     [三维汽车]^C^C^P_INSERTSWCAR
ID_InsertSWBoat			     [三维船]^C^C^P_INSERTSWBOAT
ID_InsertSWAirplane		     [三维飞机]^C^C^P_INSERTSWAIRPLANE
ID_InsertSWBooth		     [三维园林亭]^C^C^P_INSERTSWBOOTH
ID_InsertSWamusementpark	     [三维游乐设施]^C^C^P_INSERTSWAMUSEMENTPARK
[--]
ID_DefineContourLine     	     [采集等高线]^C^C^P_DEFINECONTOURLINE
ID_ScatterDContourLine               [离散等高线]^C^C^P_SCATTERDCONTOURLINE
ID_BuildLYSurfacemodel		     [地表建模]^C^C^P_BUILDLYSURFACEMODEL
ID_gardensAttachSurface		     [绿化附地]^C^C^P_GARDENSATTACHSURFACE
ID_gardensAttachS		     [绿化附模]^C^C^P_GARDENSATTACHS
[--]
ID_Hide      [消隐(&H)]^C^C_hide
ID_MnPersShad   [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)着色(&S)]
ID_2doptim     [二维线框(&2)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe   [三维线框(&3)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden      [消隐(&H)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat        [平面着色(&F)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud     [体着色(&G)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges   [带边框平面着色(&T)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges   [<-带边框体着色(&S)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)
ID_MnRender  [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)渲染(&E)]
ID_Render      [渲染(&R)...]^C^C_render
               [--]
ID_Scene       [场景(&S)...]^C^C_scene
ID_Light       [光源(&L)...]^C^C_light
ID_Rmat        [材质(&M)...]^C^C_rmat
ID_Matlib      [材质库(&Y)...]^C^C_matlib
ID_Setuv       [贴图(&A)...]^C^C_setuv
               [--]
ID_Backgroun   [背景(&B)...]^C^C_background
ID_Fog         [雾化(&F)...]^C^C_fog
ID_Lsnew       [新建配景(&N)...]^C^C_lsnew
ID_Lsedit      [编辑配景(&E)...]^C^C_lsedit
ID_Lslib       [配景库(&C)...]^C^C_lslib
               [--]
ID_Rpref       [渲染配置(&P)...]^C^C_rpref
ID_Stats       [<-统计信息(&T)...]^C^C_stats
             [--]



***POP8
**HCADVERTICAL
[竖向(&V)]
[--]
ID_DefineScatterPoint    [定义标高点]^C^C^P_DEFINESCATTERPOINT
ID_gatherDesignPoint     [采集点标高]^C^C^P_GATHERDESIGNPOINT
ID_ImportDesignEle    	 [导入标高]^C^C^P_IMPORTDESIGNELE
ID_DefineContourLine     [定义等高线]^C^C^P_DEFINECONTOURLINE
ID_ScatterDContourLine   [离散等高线]^C^C^P_SCATTERDCONTOURLINE
ID_CalRandomPtDesignEle  [任意点标高]^C^C^P_CALRANDOMPTDESIGNELE
[--]
ID_DimElevation		 [室外标高标注]^C^C^P_DIMELEVATION
ID_DimGrade		 [室外坡度标注]^C^C^P_DIMGRADE
[--]
ID_DrawPipeLine		 [管线布置]^C^C^P_DRAWPIPELINE
ID_MeasureDistance	 [长度统计]^C^C^P_MEASUREDISTANCE
ID_InputPipeEle		 [标高输入]^C^C^P_INPUTPIPEELE
ID_CalPipeHSpace	 [平面间距计算]^C^C^P_CALPIPEHSPACE
ID_CheckPipeCollision	 [管线碰撞检查]^C^C^P_CHECKPIPECOLLISION
ID_PipeDim		 [管线标注]^C^C^P_PIPEDIM
ID_DimPipeElevation	 [标高标注]^C^C^P_DIMPIPEELE
ID_PipeCutlineTable	 [管线图例制表]^C^C^P_PIPECUTLINETABLE
[--]


***POP9
**HCADDIM
[标注(&N)]
[--]
ID_curveTextMulti		     [曲线文字]^C^C^P_CURVETEXT
[--]
[->坐标标注]
ID_CoordinateDimBox	             [坐标标注...]^C^C^P_COORDDIM
ID_DimCoordinateXY	             [XY标注]^C^C^P_XYDIM
ID_DimCoordinateAB	             [AB标注]^C^C^P_ABDIM
ID_DimCoordinateBXY	             [旁注XY值]^C^C^P_BXYDIM
ID_DimCoordinateBAB	             [旁注AB值]^C^C^P_BABDIM
ID_UniteCoordinate	             [合并标注]^C^C^P_UNITEDIM
ID_DispartCoordinate	             [分开标注]^C^C^P_DISPARTDIM
ID_EditCoordinate	             [坐标编辑]^C^C^P_EDITDIM
ID_PermuteCoordinate	             [坐标置换]^C^C^P_PERMUTEDIM
ID_ShiftCoordinate	             [切换标注]^C^C^P_SHIFTDIM
ID_MoveCoordinate	             [移动标注]^C^C^P_MOVEDIM
ID_AdjustangleCoordinate             [调整标角]^C^C^P_ADJUSTANGLE
ID_ShowMark		             [显示隔号]^C^C^P_SHOWMARK
ID_HideMark		             [隐藏隔号]^C^C^P_HIDEMARK
ID_DrawCoordTable	             [坐标表]^C^C^P_DRAWCOORDTABLE
ID_CoordinateParaSet	             [<-参数设置]^C^C^P_COORDPARASET
[--]
ID_DimElevation		             [标高标注]^C^C^P_DIMELEVATION
ID_EditElevation	             [标高编辑]^C^C^P_EDITELEVATION
ID_DimGrade		             [坡度标注]^C^C^P_DIMGRADE
ID_DimSerialNo		             [编号标注]^C^C^P_DIMSERIALNO
ID_ArchFloorDim		             [层数标注]^C^C^P_ARCHFLOORDIM
ID_ShiftArchFloorDim	             [切换层数]^C^C^P_SHIFTARCHFLOORDIM
ID_ZFSignDim   			     [±0.00标注]^C^C^P_ZFSIGNDIM
ID_InterceptDim			     [截取标注]^C^C^P_INTERCEPTDIM
ID_DimVectical			     [竖向标注]^C^C^P_DIMVECTICAL
[--]
[->道路宽度标注]
ID_DimRoadWidth			     [标注一]^C^C^P_ROADWIDTHDIM
ID_DimRoadWidth2		     [<-标注二]^C^C^P_ROADWIDTHDIMTWO
[--]


***POP10
**HCADTOOL
[工具(&T)]
[--]
[->工具箱]
ID_Toolsbox		             [工具箱...]^C^C^P_TOOLSBOX
[--]
ID_ConvergeEntity		     [线段聚合]^C^C^P_CONVERGEENTITY
ID_DrawgardensLine		     [绘制线]^C^C^P_DRAWGARDENSLINE
ID_PEditFPLine			     [线拟合]^C^C^P_PEDITFPLINE
ID_ModifyCircleRadius		     [半径修改]^C^C^P_MODIFYRADIUS
ID_ClipCircleangle		     [倒圆切角]^C^C^P_CLIPCIRCLEANGLE
ID_TransVCircelAngle		     [圆切转换]^C^C^P_TRANSVCIRCELANGLE
ID_LinebothOffest		     [直线双偏移]^C^C^P_LINEBOTHOFFEST
ID_LineteamOffest		     [直线组偏移]^C^C^P_LINETEAMOFFEST
ID_DrawOutlineOfPLine		     [多义线挖空]^C^C^P_OUTLINEOFPLINE
[--]
ID_lineweightAdjust		     [线宽调整]^C^C^P_LINEWEIGHTADJUST
ID_TextAdjust			     [字高调整]^C^C^P_TEXTADJUST
ID_FillColorPattern	             [特殊填充色块]^C^C^P_FILLCOLORPATTERN
ID_EditFillHatch		     [填充图案编辑]^C^C^P_EDITFILLHATCH
ID_MakeNoNameBlock		     [制作无名块]^C^C^P_MAKENONAMEBLOCK
ID_disposeAlongline		     [沿线布置]^C^C^P_DISPOSEALONGLINE
ID_ReplaceBlock			     [块替换]^C^C^P_REPLACEBLOCK
ID_ScaleBlock			     [块缩放]^C^C^P_SCALEBLOCK
ID_calBlockNum			     [块统计]^C^C^P_CALBLOCKNUM
ID_ZModifyBlockRefColor		     [改块颜色]^C^C^P_MODIFYBLOCKCOLOR
ID_AddDelBlockRefObject		     [编辑块]^C^C^P_ADDDELBLOCKREFOBJECT
[--]
ID_DrawFrontOrder		     [置前显示]^C^C^P_DRAWFRONTORDER
ID_DrawBackOrder		     [置后显示]^C^C^P_DRAWBACKORDER
ID_AdjustDrawOrder		     [调整显示次序]^C^C^P_ADJUSTDRAWORDER
ID_SetZaxiscoordinate		     [<-Z轴为零]^C^C^P_SETZAXISCOORDINATE
[->层处理器]
ID_LayerManager		             [层处理器...]^C^C^P_LAYERMANAGE
[--]
ID_OnallLayer			     [显示全部层]^C^C^P_ONALLLAYER
ID_OnoneLayer			     [显示指定层]^C^C^P_ONONELAYER
ID_OffoneLayer			     [关闭指定层]^C^C^P_OFFONELAYER
ID_SeloneLayer			     [设定当前层]^C^C^P_SELONELAYER
ID_attachLayer			     [归属指定层]^C^C^P_ATTACHLAYER
ID_UniteLayer			     [合并相关层]^C^C^P_UNITELAYER
ID_DecomposeLayer		     [分解相关层]^C^C^P_DECOMPOSELAYER
ID_DeleteLayer			     [删除指定层]^C^C^P_DELETELAYER
ID_MemoryLayer			     [<-层显示记忆]^C^C^P_MEMORYLAYER
ID_DistillEntPara		     [提取实体参数]^C^C^P_DISTILLENTPARA
ID_ParkSave			     [部分保存]^C^C^P_PARKSAVE
ID_CalHatchArea			     [面积统计标注]^C^C^P_CALHATCHAREA
ID_MeasureDistance		     [测量长度]^C^C^P_MEASUREDISTANCE
ID_MeasureArea			     [测量面积]^C^C^P_MEASUREAREA
ID_NewTable		             [制表器]^C^C^P_NEWTABLE 
ID_MakeWindRose		             [风玫瑰生成器]^C^C^P_MAKEWINDROSE
[--]
ID_SetArchThickness		     [设置高度]^C^C^P_SETARCHTHICKNESS
ID_StartThreeDimenbar		     [三维视角]^C^C^P_THREEDIMENBAR
ID_ZaxisCopy			     [垂直复制]^C^C^P_ZAXISCOPY
ID_ZaxisMove			     [垂直移动]^C^C^P_ZAXISMOVE
ID_SaveViewWindow		     [保存视窗\tCtrl+1]^C^C^P_SAVEVIEWWINDOW
ID_ManViewWindow		     [管理视窗\tCtrl+2]^C^C^P_MANVIEWWINDOW
ID_GroupOnOff			     [组开关\tCtrl+A]^C^C^P_GROUPONOFF
[--]



***POP11
**HCADINDEX
[指标(&Z)]
[--]
ID_EconomyIndex	            	     [城市经济技术指标表]^C^C^P_ECONOMYINDEX
ID_ColligateIndex            	     [规划综合技术指标表]^C^C^P_COLLIGATEINDEX
ID_PublicProjectIndex          	     [公用工程指标表]^C^C^P_PUBLICPROJECTINDEX
[--]
ID_CalGHPoltArea          	     [总用地面积]^C^C^P_CALGHPOLTAREA
ID_CalConstructJZArea          	     [建构筑面积]^C^C^P_CALCONSTRUCTJZAREA
ID_CalConstructZDArea          	     [建构筑占地面积]^C^C^P_CALCONSTRUCTZDAREA
ID_CalVirescenceArea          	     [绿化面积]^C^C^P_CALVIRESCENCEAREA
ID_CalPoltArchDensity          	     [地块建筑密度]^C^C^P_CALPOLTARCHDENSITY
ID_CalPoltArchCubage          	     [地块建筑容积率]^C^C^P_CALPOLTARCHCUBAGE
ID_CalVirescenceRadio		     [地块绿地率]^C^C^P_CALVIRESCENCERADIO
[--]

***POP12
**HCADTK
[做法图(&F)]
[--]
ID_InsertYuanRoadSpread		     [园路铺装]^C^C^P_INSERTYUANROADSPREAD
ID_InsertSidestep		     [台阶]^C^C^P_INSERTSIDESTEP
ID_InsertEarthwall		     [挡土墙]^C^C^P_INSERTEARTHWALL
ID_InsertRilievo		     [浮雕]^C^C^P_INSERTRILIEVO
ID_InsertRestBooth		     [休息亭]^C^C^P_INSERTRESTBOOTH
ID_InsertFlowerFrame		     [花架]^C^C^P_INSERTFLOWERFRAME
ID_InsertZborder		     [花坛]^C^C^P_INSERTZBORDER
ID_Insertdeskchair		     [桌凳]^C^C^P_INSERTDESKCHAIR
ID_Insertcistern		     [水池]^C^C^P_INSERTCISTERN
ID_Insertrockery		     [假山]^C^C^P_INSERTROCKERY
ID_InsertZArchSketch		     [建筑小品]^C^C^P_INSERTZARCHSKETCH
ID_Insertenfantstage		     [儿童活动场]^C^C^P_INSERTENFANTSTAGE
ID_InsertZOutStructure		     [室外构造]^C^C^P_INSERTZOUTSTRUCTURE
ID_InsertZArchDetaildraw	     [建筑大样]^C^C^P_INSERTZARCHDETAILDRAW
ID_InsertZCorniceDetaildraw	     [檐口大样]^C^C^P_INSERTZCORNICEDETAILDRAW
ID_InsertZPumpDetaildraw	     [水泵详图]^C^C^P_INSERTZPUMPDETAILDRAW
[--]



***POP13
**HCADTK
[图库中心(&X)]
[--]
ID_StartGalleryCenter                [图库中心...\tCtrl+T]^C^C^P_GALLERYCENTER
[--]
ID_InsertParterre		     [花坛]^C^C^P_INSERTPARTERRE
ID_InsertPMTree			     [平面树]^C^C^P_INSERTPMTREE
ID_InsertPMLamp			     [平面灯]^C^C^P_INSERTPMLAMP
ID_InsertPMCar			     [平面车]^C^C^P_INSERTPMCAR
ID_InsertPMBooth		     [绿化亭]^C^C^P_INSERTPMBOOTH
ID_InsertArchSketch		     [建筑小品]^C^C^P_INSERTARCHSKETCH
ID_InsertFieldSketch		     [场地小品]^C^C^P_INSERTFIELDSKETCH
ID_InsertSight			     [景点]^C^C^P_INSERTSIGHT
ID_InsertPMPlayground		     [运动场]^C^C^P_INSERTPMPLAYGROUND
ID_InsertRuleSign		     [分规符号]^C^C^P_INSERTRULESIGN
ID_InsertServeestab		     [服务设施]^C^C^P_INSERTSERVEESTAB
ID_InsertProjectestab		     [工程设施]^C^C^P_INSERTPROJECTESTAB
ID_InsertRoadSign		     [道路方向符]^C^C^P_INSERTROADSIGN
ID_InsertWStyleElement		     [西式元素]^C^C^P_INSERTWSTYLEELEMENT
[--]
ID_InsertLMTree			     [立面树]^C^C^P_INSERTLMTREE
ID_InsertLMLamp		   	     [立面灯]^C^C^P_INSERTLMLAMP
ID_InsertLMCar			     [立面车]^C^C^P_INSERTLMCAR
ID_InsertLMPerson		     [立面人]^C^C^P_INSERTLMPERSON
ID_InsertLMBonsai		     [立面盆景]^C^C^P_INSERTLMBONSAI
ID_InsertLMStonestack		     [立面石堆]^C^C^P_INSERTLMSTONESTACK
ID_InsertLMVDrawing		     [竖向详图]^C^C^P_INSERTLMVDRAWING
[--]
ID_InsertSWTree			     [三维树]^C^C^P_INSERTSWTREE
ID_InsertSWLamp			     [三维路灯]^C^C^P_INSERTSWLAMP
[--]
ID_DefineGalleryCenter		     [自定义...]^C^C^P_DEFINEGALLERYCENTER
[--]

***POP14
**WINDOW
ID_MnWindow  [窗口(&W)] 
ID_DWG_CLOSE	     [关闭(&O)]^C^C_close
ID_WINDOW_CLOSEALL   [全部关闭(&L)]^C^C_closeall
                     [--]
ID_WINDOW_CASCADE    [层叠(&C)]^C^C_syswindows;_cascade
ID_WINDOW_TILE_HORZ  [水平平铺(&H)]^C^C_syswindows;_hor
ID_WINDOW_TILE_VERT  [垂直平铺(&T)]^C^C_syswindows;_vert
ID_WINDOW_ARRANGE    [排列图标(&A)]^C^C_syswindows;_arrange


***POP15
**HCADHELP
[帮助(&H)]
[--]
ID_OpenHCADHelp 		     [在线帮助\tCtrl+F1]^C^C^P_OPENHCADHELP
ID_OpenHCADReadme		     [功能演示\tCtrl+F2]^C^C^P_OPENHCADREADME
ID_OpenHCADGF	 		     [规范\tCtrl+F3]^C^C^P_OPENHCADGF
ID_ShowCompanyInfo 		     [公司信息]^C^C^P_SHOWCOMPANYINFO
[--]



// POP menus with a primary alias of POP500 and above do not appear in the customize
// menu list of menus that can be inserted into the main menu bar. All context
// menus should have primary aliases of POP500 and above.

***POP500
**GRIPS
//  When a grip is hot, then display the following shortcut menu for grips.  See also AUX1 menu.
             [夹点光标菜单(&G)]
ID_Enter     [确认(&E)];
             [--]
ID_GripMove  [移动(&M)]_move
ID_GripMirro [镜像(&I)]_mirror
ID_GripRotat [旋转(&R)]_rotate
ID_GripScale [缩放(&L)]_scale
ID_GripStret [拉伸(&S)]_stretch
             [--]
ID_GripBase  [基点(&B)]_base
ID_GripCopy  [复制(&C)]_copy
ID_GripRefer [$(if,$(or,$(eq,$(getvar,cmdnames),GRIP_SCALE),$(eq,$(getvar,cmdnames),GRIP_ROTATE)),,~)参照(&F)]_reference
ID_GripUndo  [放弃(&U)]_u
             [--]
ID_Modify  [特性(&P)]^C^C_properties
             [--]
ID_GripExit  [退出(&X)]_exit

***POP501
**CMDEFAULT
             [默认模式的上下文菜单]
ID_CMNonLast [重复%s(&R)]^C^C;
             [--]
ID_Cutclip   [剪切(&T)]^C^C_cutclip
ID_Copyclip  [复制(&C)]^C^C_copyclip
ID_Copybase  [带基点复制(&B)]^C^C_copybase
ID_Pasteclip [粘贴(&P)]^C^C_pasteclip
ID_Pastebloc [粘贴为块(&K)]^C^C_pasteblock
ID_Pasteorig [粘贴到原坐标(&D)]^C^C_pasteorig
             [--]
ID_U         [放弃(&U)]^C^C_u
ID_Redo      [重做(&D)]^C^C_mredo 1
ID_Pan       [平移(&A)]'_pan
ID_ZoomRealt [缩放(&Z)]'_zoom ;
             [--]
ID_Filter    [快速选择(&Q)...]^C^C_qselect
ID_TextFind  [查找(&F)...]^C^C_find
ID_Preferenc [选项(&O)...]^C^C_options

***POP502
**CMEDIT
             [编辑模式的上下文菜单]
ID_CMSelLast [重复%s(&R)]^C^C;
             [--]
ID_Cutclip   [剪切(&T)]^C^C_cutclip
ID_Copyclip  [复制(&C)]^C^C_copyclip
ID_Copybase  [带基点复制(&B)]^C^C_copybase
ID_Pasteclip [粘贴(&P)]^C^C_pasteclip
ID_Pastebloc [粘贴为块(&K)]^C^C_pasteblock
ID_Pasteorig [粘贴到原坐标(&D)]^C^C_pasteorig
             [--]
ID_Erase     [删除(&E)]^C^C_erase
ID_Move      [移动(&M)]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
ID_Copy      [复制选择(&Y)]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
ID_Scale     [缩放(&L)]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
ID_Rotate    [旋转(&O)]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)

             [--]
ID_Deselectall [全部不选(&A)]^C^C^P(ai_deselect) ^P
             [--]
ID_Filter    [快速选择(&Q)...]^C^C_qselect
ID_TextFind  [查找(&F)...]^C^C_find
ID_Ai_propch [特性(&S)]^C^C_properties

***POP503
**CMCOMMAND
             [命令模式的上下文菜单]
ID_Enter     [确认(&E)];
ID_Cancel    [取消(&C)]^C
             [--]
ID_Pan       [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)平移(&P)]'_pan
ID_ZoomRealt [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)缩放(&Z)]'_zoom ;

***POP504
**OBJECTS_DIMENSION
                [标注对象的上下文菜单]
ID_DimText      [->标注文字位置(&X)]
ID_DimAbove     [在尺寸线上(&A)]^C^C_ai_dim_textabove
ID_DimTxtCen    [置中(&C)]^C^C_ai_dim_textcenter
ID_DimHome      [默认位置(&H)]^C^C_ai_dim_texthome
ID_DimTxtMove2  [单独移动文字(&M)]^C^C_aidimtextmove _2
ID_DimTxtMove1  [与引线一起移动(&L)]^C^C_aidimtextmove _1
ID_DimTxtMove0  [<-与尺寸线一起移动(&D)]^C^C_aidimtextmove _0
ID_DimPrec      [->精度(&R)]
ID_DimPrec0      [0]^C^C_aidimprec _0
ID_DimPrec1      [0.0]^C^C_aidimprec _1
ID_DimPrec2      [0.00]^C^C_aidimprec _2
ID_DimPrec3      [0.000]^C^C_aidimprec _3
ID_DimPrec4      [0.0000]^C^C_aidimprec _4
ID_DimPrec5      [0.00000]^C^C_aidimprec _5
ID_DimPrec6      [<-0.000000]^C^C_aidimprec _6
ID_DimSty1     [->标注样式(&D)]
ID_DimSty2        [另存为新样式(&S)...]^C^C_aidimstyle _S
                  [--]
ID_DimSty3        [标注样式 MRU1]^C^C_aidimstyle _1
ID_DimSty4        [标注样式 MRU2]^C^C_aidimstyle _2
ID_DimSty5        [标注样式 MRU3]^C^C_aidimstyle _3
ID_DimSty6        [标注样式 MRU4]^C^C_aidimstyle _4
ID_DimSty7        [标注样式 MRU5]^C^C_aidimstyle _5
ID_DimSty8        [标注样式 MRU6]^C^C_aidimstyle _6
ID_DimSty9        [<-其他(&O)...]^C^C_aidimstyle _O

***POP505
**OBJECT_VIEWPORT
                 [视口对象的上下文菜单]
ID_VpClip        [视口剪裁(&V)]^C^C_vpclip
ID_Vport_disp    [->显示视口对象(&D)]
ID_Vport_dispon  [是(&Y)]^C^C_-vports _on _p;;
ID_Vport_dispoff [<-否(&N)]^C^C_-vports _off _p;;
ID_Vport_lock    [->显示锁定(&L)]
ID_Vport_lockon  [是(&Y)]^C^C_-vports _lock _on _p;;
ID_Vport_lockoff [<-否(&N)]^C^C_-vports _lock _off _p;;
ID_Vport_shadeplot [->着色打印(&S)]
ID_Vport_asdisp  [真实显示(&A)]^C^C_-vports _shadeplot _as _p;;
ID_Vport_wframe  [线框(&W)]^C^C_-vports _shadeplot _wireframe _p;;
ID_Vport_hidden  [隐藏(&H)]^C^C_-vports _shadeplot _hidden _p;;
ID_Vport_render  [<-渲染(&R)]^C^C_-vports _shadeplot _rendered _p;;

***POP506
**OBJECTS_XREF
                [外部参照对象的上下文菜单]
ID_XOpen        [打开外部参照(&X)]^C^C_xopen 
ID_Xclip        [外部参照剪裁(&I)]^C^C_xclip
ID_XRef         [外部参照管理器(&N)...]^C^C_xref

***POP507
**OBJECT_MTEXT
        [多行文字对象的上下文菜单]
ID_Mtedit   [编辑多行文字(&I)...]^C^C_mtedit

***POP508
**OBJECT_TEXT
        [文字对象的上下文菜单]
ID_Ddedit   [编辑文字(&I)...]^C^C_ddedit

***POP509
**OBJECT_HATCH
        [图案填充对象的上下文菜单]
ID_Hatchedit  [编辑图案填充(&H)...]^C^C_hatchedit

***POP510
**OBJECT_LWPOLYLINE
        [多段线对象的上下文菜单]
ID_Pedit    [编辑多段线(&I)]^C^C_pedit

***POP511
**OBJECT_SPLINE
        [样条曲线对象的上下文菜单]
ID_Splinedit  [编辑样条曲线(&I)]^C^C_splinedit

***POP512
**OBJECT_POLYLINE
        [多段线对象的上下文菜单]
ID_Pedit    [编辑多段线(&I)]^C^C_pedit

***POP513
**OBJECT_XREF
                [外部参照对象的上下文菜单]
ID_RefEdit      [在位编辑外部参照(&D)]^C^C_refedit
ID_XOpen        [打开外部参照(&X)]^C^C_xopen 
ID_Xclip        [外部参照剪裁(&I)]^C^C_xclip
ID_XRef         [外部参照管理器(&N)...]^C^C_xref

***POP514
**OBJECT_BLOCKREF
                [BLOCK 对象的上下文菜单]
ID_RefEdit      [在位编辑块(&I)]^C^C_refedit

***POP515
**OBJECT_ATTBLOCKREF
                [具有属性的 BLOCK 对象的上下文菜单]
ID_RefEdit      [在位编辑块(&I)]^C^C_refedit
ID_EAttEdit     [编辑属性(&U)...]^C^C_eattedit

***POP516
**OBJECTS_VIEWPORT
                 [视口对象的上下文菜单]
ID_VpClip        [视口剪裁(&V)]^C^C_vpclip
ID_Vport_disp    [->显示视口对象(&D)]
ID_Vport_dispon  [是(&Y)]^C^C_-vports _on _p;;
ID_Vport_dispoff [<-否(&N)]^C^C_-vports _off _p;;
ID_Vport_lock    [->显示锁定(&L)]
ID_Vport_lockon  [是(&Y)]^C^C_-vports _lock _on _p;;
ID_Vport_lockoff [<-否(&N)]^C^C_-vports _lock _off _p;;
ID_Vport_shadeplot [->着色打印(&S)]
ID_Vport_asdisp  [真实显示(&A)]^C^C_-vports _shadeplot _as _p;;
ID_Vport_wframe  [线框(&W)]^C^C_-vports _shadeplot _wireframe _p;;
ID_Vport_hidden  [隐藏(&H)]^C^C_-vports _shadeplot _hidden _p;;
ID_Vport_render  [<-渲染(&R)]^C^C_-vports _shadeplot _rendered _p;;

//
//   Begin AutoCAD ToolBars
//

***TOOLBARS

**TB_HCADSYS
ID_TbHCADSYS      [_Toolbar("HCAD系统", _Floating, _Hide, 100, 90, 1)]
ID_SystemInit	  [_Button("系统初始化", 系统初始化.BMP, 系统初始化.BMP)]^C^C_SYSTEMINIT
ID_SystemDrawFrame [_Button("绘制图框", 绘制图框.BMP, 绘制图框.BMP)]^C^C_DRAWFRAME
ID_SetCoordinate   [_Button("设置坐标", 设置坐标.BMP, 设置坐标.BMP)]^C^C_SETCOORDINATE
ID_DrawCoorNet   [_Button("绘制坐标网", 绘制坐标网.BMP, 绘制坐标网.BMP)]^C^C_DRAWCOORNET 
ID_ShowHideUCSICON   [_Button("UCS图标开关", UCS图标开关.BMP, UCS图标开关.BMP)]^C^C_SHOWHIDEUCSICON
		   
	     
**TB_HCADTOOLS
ID_TbHCADTOOLS    [_Toolbar("HCAD工具", _Floating, _Hide, 250, 90, 1)]
ID_Toolsbox	  [_Button("工具箱一", 工具箱一.BMP, 工具箱一.BMP)]^C^C_TOOLSBOX
ID_Toolsbox2	  [_Button("工具箱二", 工具箱二.BMP, 工具箱二.BMP)]^C^C_TOOLSBOX2
ID_Toolsbox3	  [_Button("工具箱三", 工具箱三.BMP, 工具箱三.BMP)]^C^C_TOOLSBOX3
[--]
ID_NewTable	  [_Button("制表器", 制表器.BMP, 制表器.BMP)]^C^C_NEWTABLE 
ID_LayerManager	  [_Button("层处理器", 层处理器.BMP, 层处理器.BMP)]^C^C_LAYERMANAGE
ID_MakeWindRose	  [_Button("风玫瑰生成器", 风玫瑰生成器.BMP, 风玫瑰生成器.BMP)]^C^C_MAKEWINDROSE
[--]
ID_SetArchThickness  [_Button("设置高度", 设置高度.BMP, 设置高度.BMP)]^C^C_SETARCHTHICKNESS
ID_StartThreeDimenbar [_Button("三维视角", 三维视角.BMP, 三维视角.BMP)]^C^C_THREEDIMENBAR
 

**TB_HCADDIMENSION
ID_TbHCADDimensi    [_Toolbar("HCAD标注", _Floating, _Hide, 100, 130, 1)]
ID_CoordinateDimBox [_Button("坐标标注", 坐标标注.BMP, 坐标标注.BMP)]^C^C_COORDDIM
[--]
ID_ElevationParaSet [_Button("标高设置", 标高设置.BMP, 标高设置.BMP)]^C^C_ELEVPARASET
ID_DimElevation	    [_Button("标高标注", 标高标注.BMP, 标高标注.BMP)]^C^C_DIMELEVATION
ID_EditElevation    [_Button("标高编辑", 标高编辑.BMP, 标高编辑.BMP)]^C^C_EDITELEVATION
[--]
ID_GradeParaSet	    [_Button("坡度设置", 坡度设置.BMP, 坡度设置.BMP)]^C^C_GRADEPARASET
ID_DimGrade	    [_Button("坡度标注", 坡度标注.BMP, 坡度标注.BMP)]^C^C_DIMGRADE	         
[--]
ID_SerialNoParaSet  [_Button("编号设置", 编号设置.BMP, 编号设置.BMP)]^C^C_SERIALPARASET
ID_DimSerialNo	    [_Button("编号标注", 编号标注.BMP, 编号标注.BMP)]^C^C_DIMSERIALNO
[--]
ID_ArchFloorParaSet [_Button("层数设置", 层数设置.BMP, 层数设置.BMP)]^C^C_ARCHFLOORSET
ID_ArchFloorDim	    [_Button("层数标注", 层数标注.BMP, 层数标注.BMP)]^C^C_ARCHFLOORDIM
[--]	    
ID_ZFSignDim 	   [_Button("±0.00标注", ±0.00标注.BMP, ±0.00标注.BMP)]^C^C_ZFSIGNDIM
ID_InterceptDim	   [_Button("截取标注", 截取标注.BMP, 截取标注.BMP)]^C^C_INTERCEPTDIM
ID_DimRoadWidth	  [_Button("道路宽度标注一", 道路宽度标注一.BMP, 道路宽度标注一.BMP)]^C^C_ROADWIDTHDIM
ID_DimRoadWidth2    [_Button("道路宽度标注二", 道路宽度标注二.BMP, 道路宽度标注二.BMP)]^C^C_ROADWIDTHDIMTWO          
 	         
**TB_HCADROAD
ID_TbHCADROAD    [_Toolbar("HCAD道路", _Floating, _Hide, 100, 175, 1)]
ID_DrawRoad      [_Button("道路绘制", 道路绘制.BMP, 道路绘制.BMP)]^C^C_DRAWROAD
[--]
ID_DrawRoadBugle [_Button("绘制喇叭口", 绘制喇叭口.BMP, 绘制喇叭口.BMP)]^C^C_DRAWROADBUGLE
ID_DelRoadBugle	 [_Button("删除喇叭口", 删除喇叭口.BMP, 删除喇叭口.BMP)]^C^C_DELROADBUGLE
[--]
ID_DrawVirescentceBelt [_Button("分隔带逐个绘制", 分隔带逐个绘制.BMP, 分隔带逐个绘制.BMP)]^C^C_DRAWFGD
ID_DDrawVirescentceBeltAuto [_Button("分隔带自动绘制", 分隔带自动绘制.BMP, 分隔带自动绘制.BMP)]^C^C_DRAWFGDAUTO
ID_BeltSinglelineTrim  [_Button("分隔带单线修剪", 分隔带单线修剪.BMP, 分隔带单线修剪.BMP)]^C^C_BELTSINGLELINETRIM
ID_BeltTwolineTrim     [_Button("分隔带双线修剪", 分隔带双线修剪.BMP, 分隔带双线修剪.BMP)]^C^C_BELTTWOLINETRIM
ID_FillBelt	 [_Button("分隔带填充", 分隔带填充.BMP, 分隔带填充.BMP)]^C^C_FILLBELT
[--]
ID_DisposeTreeOnTheWay	 [_Button("沿路布置树", 沿路布置树.BMP, 沿路布置树.BMP)]^C^C_DISPOSETREEONTHEWAY
ID_DisposeTreeOnTheLine	 [_Button("沿线布置树", 沿线布置树.BMP, 沿线布置树.BMP)]^C^C_DISPOSETREEONTHELINE
ID_ReplaceTree		 [_Button("替换树", 替换树.BMP, 替换树.BMP)]^C^C_REPLACETREE
[--]
ID_CalRoadTotal		 [_Button("道路统计", 道路统计.BMP, 道路统计.BMP)]^C^C_CALROADTOTAL
ID_LookforRoadData	 [_Button("查看道路", 查看道路.BMP, 查看道路.BMP)]^C^C_LOOKFORROADDATA
ID_RoadAttrModify	 [_Button("属性查询修改", 属性查询修改.BMP, 属性查询修改.BMP)]^C^C_ROADATTRMODIFY
[--]
ID_TrimRoad		 [_Button("道路修剪", 道路修剪.BMP, 道路修剪.BMP)]^C^C_ROADTRIM
ID_RoadColorFill	 [_Button("道路色块填充", 道路色块填充.BMP, 道路色块填充.BMP)]^C^C_ROADCOLORFILL
ID_RoadHintFill		 [_Button("道路示意填充", 道路示意填充.BMP, 道路示意填充.BMP)]^C^C_ROADHINTFILL
[--]
ID_DimCurveElement	 [_Button("曲线要素标注", 曲线要素标注.BMP, 曲线要素标注.BMP)]^C^C_DIMCURVEELEMENT
ID_EditCurveElement	 [_Button("曲线要素编辑", 曲线要素编辑.BMP, 曲线要素编辑.BMP)]^C^C_EDITCURVEELEMENT
ID_DrawCurveEleTable	 [_Button("曲线要素表", 曲线要素表.BMP, 曲线要素表.BMP)]^C^C_DRAWCURVEELETABLE
[--]
ID_RoadSchedule		 [_Button("道路一览表", 道路一览表.BMP, 道路一览表.BMP)]^C^C_ROADSCHEDULE
ID_DrawTransect	 	 [_Button("道路断面", 道路断面.BMP, 道路断面.BMP)]^C^C_DRAWTRANSECT

**TB_HCADPLOT
ID_TbHCADPLOT      [_Toolbar("HCAD地块", _Floating, _Hide, 100, 220, 1)]
ID_DrawRedLine     [_Button("绘制红线", 绘制红线.BMP, 绘制红线.BMP)]^C^C_DRAWREDLINE
[--]
ID_CreatePolt      [_Button("地块生成", 地块生成.BMP, 地块生成.BMP)]^C^C_CREATEPOLT
ID_FillPlotOfSel   [_Button("地块选择填充", 地块选择填充.BMP, 地块选择填充.BMP)]^C^C_FILLSPLOT
ID_FillPlotOfType  [_Button("地块类别填充", 地块类别填充.BMP, 地块类别填充.BMP)]^C^C_FILLTPLOT
ID_ShowPlotPattern [_Button("地块显示开关", 地块显示开关.BMP, 地块显示开关.BMP)]^C^C_SHOWPLOTPATTERN
ID_QueryPlotAttribute   [_Button("地块属性查询", 地块属性查询.BMP, 地块属性查询.BMP)]^C^C_QUERYPLOTATTR
ID_PlotAttrDim   [_Button("地块属性标注", 地块属性标注.BMP, 地块属性标注.BMP)]^C^C_PLOTATTRDIM
[--]
ID_DrawIndexTable  [_Button("地块指标统计表", 地块指标统计表.BMP, 地块指标统计表.BMP)]^C^C_DRAWINDEXTABLE
ID_DrawVillagePlotTable  [_Button("村庄用地计算表", 村庄用地计算表.BMP, 村庄用地计算表.BMP)]^C^C_DRAWVILLAGETABLE
ID_DrawCityPlotTable  [_Button("城市用地计算表", 城市用地计算表.BMP, 城市用地计算表.BMP)]^C^C_DRAWCITYTABLE
ID_DrawHabitPlotTable  [_Button("居住区用地平衡表", 居住区用地平衡表.BMP, 居住区用地平衡表.BMP)]^C^C_DRAWHABITTABLE
ID_DrawAllPlotCollect  [_Button("总体规划用地表", 总体规划用地表.BMP, 总体规划用地表.BMP)]^C^C_DRAWALLCOLLECT
	
 
**TB_HCADARCH
ID_TbHCADARCH      [_Toolbar("HCAD建筑", _Floating, _Hide, 100, 260, 1)]
ID_DrawTurnAround  [_Button("绘制回车场", 绘制回车场.BMP, 绘制回车场.BMP)]^C^C_DRAWTURNAROUND
ID_DrawPark	   [_Button("绘制停车场", 绘制停车场.BMP, 绘制停车场.BMP)]^C^C_DRAWPARK
[--]
ID_DrawArch	   [_Button("绘制建构筑", 绘制建构筑.BMP, 绘制建构筑.BMP)]^C^C_DRAWARCH
ID_singleArchInsert  [_Button("单体建筑调用", 单体建筑调用.BMP, 单体建筑调用.BMP)]^C^C_SINGLEARCHINSERT
ID_QueryModifyArch   [_Button("属性查询修改", 建筑属性查询修改.BMP, 建筑属性查询修改.BMP)]^C^C_QUERYMODIFYARCH
ID_FillArch	     [_Button("建筑填充", 建筑填充.BMP, 建筑填充.BMP)]^C^C_FILLARCH
[--]
ID_DrawDanTuWall     [_Button("绘制挡土墙", 绘制挡土墙.BMP, 绘制挡土墙.BMP)]^C^C_DRAWDANTUWALL
 
**TB_HCADVIRESCENCE
ID_TbHCADVIRESCENCE  [_Toolbar("HCAD绿化", _Floating, _Hide, 100, 300, 1)]
ID_DrawdotshapeLawn  [_Button("点状草坪", 点状草坪.BMP, 点状草坪.BMP)]^C^C_DRAWDOTSHAPELAWN
ID_DrawGrassLawn     [_Button("绘制草坪", 绘制草坪.BMP, 绘制草坪.BMP)]^C^C_DRAWGRASSLAWN
ID_DrawFlower        [_Button("绘制花", 绘制花.BMP, 绘制花.BMP)]^C^C_DRAWFLOWER
ID_DrawbambooFlower  [_Button("绘制竹类", 绘制竹类.BMP, 绘制竹类.BMP)]^C^C_DRAWBAMBOO
ID_DrawGreenFense    [_Button("绘制绿篱", 绘制绿篱.BMP, 绘制绿篱.BMP)]^C^C_DRAWGREENFENSE
ID_DrawArborFrutex  [_Button("绘制乔灌木", 绘制乔灌木.BMP, 绘制乔灌木.BMP)]^C^C_DRAWARBORFRUTEX
ID_InsertTree       [_Button("单体树", 单体树.BMP, 单体树.BMP)]^C^C_INSERTTREE
[--]
ID_DrawgravelRoad   [_Button("绘制碎石路", 绘制碎石路.BMP, 绘制碎石路.BMP)]^C^C_DRAWGRAVELROAD
ID_DrawTingBu	    [_Button("绘制汀步", 绘制汀步.BMP, 绘制汀步.BMP)]^C^C_DRAWTINGBU
ID_DrawBridge       [_Button("绘制桥梁", 绘制桥梁.BMP, 绘制桥梁.BMP)]^C^C_DRAWBRIDGE
ID_DrawFloor        [_Button("地面图案铺砌", 地面图案铺砌.BMP, 地面图案铺砌.BMP)]^C^C_DRAWFLOOR 

**TB_DIMENSION
ID_TbDimensi [_Toolbar("标注", _Floating, _Hide, 100, 130, 1)]
ID_Dimlinear [_Button("线性标注", RCDATA_16_DIMLIN, RCDATA_16_DIMLIN)]^C^C_dimlinear
ID_Dimaligne [_Button("对齐标注", RCDATA_16_DIMALI, RCDATA_16_DIMALI)]^C^C_dimaligned
ID_Dimordina [_Button("坐标标注", RCDATA_16_DIMORD, RCDATA_16_DIMORD)]^C^C_dimordinate
             [--]
ID_Dimradius [_Button("半径标注", RCDATA_16_DIMRAD, RCDATA_16_DIMRAD)]^C^C_dimradius
ID_Dimdiamet [_Button("直径标注", RCDATA_16_DIMDIA, RCDATA_16_DIMDIA)]^C^C_dimdiameter
ID_Dimangula [_Button("角度标注", RCDATA_16_DIMANG, RCDATA_16_DIMANG)]^C^C_dimangular
             [--]
ID_QDim      [_Button("快速标注", RCDATA_16_QDIM, RCDATA_16_QDIM)]^C^C_qdim                          
ID_Dimbaseli [_Button("基线标注", RCDATA_16_DIMBAS, RCDATA_16_DIMBAS)]^C^C_dimbaseline
ID_Dimcontin [_Button("连续标注", RCDATA_16_DIMCON, RCDATA_16_DIMCON)]^C^C_dimcontinue
             [--]
ID_Leader    [_Button("快速引线", RCDATA_16_QLEADER, RCDATA_16_QLEADER)]^C^C_qleader                          
ID_Tolerance [_Button("公差", RCDATA_16_TOLERA, RCDATA_16_TOLERA)]^C^C_tolerance
ID_Dimcenter [_Button("圆心标记", RCDATA_16_DIMCEN, RCDATA_16_DIMCEN)]^C^C_dimcenter
             [--]
ID_Dimedit   [_Button("编辑标注", RCDATA_16_DIMNEW, RCDATA_16_DIMNEW)]^C^C_dimedit
ID_Dimtedit  [_Button("编辑标注文字", RCDATA_16_DIMRED, RCDATA_16_DIMRED)]^C^C_dimtedit
ID_DimUpdate [_Button("标注更新", RCDATA_16_DIMUPD, RCDATA_16_DIMUPD)]^C^C_-dimstyle _apply
             [--]
ID_DimStyle  [_Control(_dimstyle)]
ID_Ddim      [_Button("标注样式", RCDATA_16_DIMSTY, RCDATA_16_DIMSTY)]'_dimstyle

**TB_DRAW
ID_TbDraw    [_Toolbar("绘图", _Left, _Show, 0, 0, 1)]
ID_Line      [_Button("直线", RCDATA_16_LINE, RCDATA_16_LINE)]^C^C_line
ID_Xline     [_Button("构造线", RCDATA_16_XLINE, RCDATA_16_XLINE)]^C^C_xline
ID_Pline     [_Button("多段线", RCDATA_16_PLINE, RCDATA_16_PLINE)]^C^C_pline
ID_Polygon   [_Button("正多边形", RCDATA_16_POLYGO, RCDATA_16_POLYGO)]^C^C_polygon
ID_Rectang   [_Button("矩形", RCDATA_16_RECTAN, RCDATA_16_RECTAN)]^C^C_rectang
ID_Arc       [_Button("圆弧", RCDATA_16_ARC3PT, RCDATA_16_ARC3PT)]^C^C_arc
ID_Circle    [_Button("圆", RCDATA_16_CIRRAD, RCDATA_16_CIRRAD)]^C^C_circle
ID_Revcloud  [_Button("修订云线", RCDATA_16_REVCLOUD, RCDATA_16_REVCLOUD)]^C^C_revcloud
ID_Spline    [_Button("样条曲线", RCDATA_16_SPLINE, RCDATA_16_SPLINE)]^C^C_spline
ID_Ellipse   [_Button("椭圆", RCDATA_16_ELLAE, RCDATA_16_ELLAE)]^C^C_ellipse
ID_EllipseAr [_Button("椭圆弧", RCDATA_16_ELLARC, RCDATA_16_ELLARC)]^C^C_ellipse _a
ID_TbInsert  [_Flyout("块", RCDATA_16_BLOCK, RCDATA_16_BLOCK, _OtherIcon, IR_gardensSoft.TB_INSERT)]
ID_Bmake     [_Button("创建块", RCDATA_16_BLOCK, RCDATA_16_BLOCK)]^C^C_block
ID_PointMult [_Button("点", RCDATA_16_POINT, RCDATA_16_POINT)]*^C^C_point
ID_Bhatch    [_Button("图案填充", RCDATA_16_BHATCH, RCDATA_16_BHATCH)]^C^C_bhatch
ID_Region    [_Button("面域", RCDATA_16_REGION, RCDATA_16_REGION)]^C^C_region
ID_Mtext     [_Button("多行文字", RCDATA_16_MTEXT, RCDATA_16_MTEXT)]^C^C_mtext

**TB_DRAWORDER
ID_TbDrawOrd [_Toolbar("绘图顺序", _Floating, _Hide, 100, 150, 1)]
ID_BringFrnt [_Button("前置", RCDATA_16_BN2FNT, RCDATA_16_BN2FNT)]^C^C^P(ai_draworder "_f") ^P
ID_SendBack  [_Button("后置", RCDATA_16_SN2BCK, RCDATA_16_SN2BCK)]^C^C^P(ai_draworder "_b") ^P
ID_BringAbov [_Button("置于对象之上", RCDATA_16_BNGFWD, RCDATA_16_BNGFWD)]^C^C^P(ai_draworder "_a") ^P
ID_SendUnder [_Button("置于对象之下", RCDATA_16_SNDBCK, RCDATA_16_SNDBCK)]^C^C^P(ai_draworder "_u") ^P

**TB_INQUIRY
ID_TbInquiry [_Toolbar("查询", _Floating, _Hide, 100, 170, 1)]
ID_Dist      [_Button("距离", RCDATA_16_DIST, RCDATA_16_DIST)]'_dist
ID_Area      [_Button("面积", RCDATA_16_AREA, RCDATA_16_AREA)]^C^C_area
ID_Massprop  [_Button("面域/质量特性", RCDATA_16_MASSPR, RCDATA_16_MASSPR)]^C^C_massprop
             [--]
ID_List      [_Button("列表", RCDATA_16_LIST, RCDATA_16_LIST)]^C^C_list
ID_Id        [_Button("定位点", RCDATA_16_ID, RCDATA_16_ID)]'_id

**TB_INSERT
ID_TbInsert  [_Toolbar("插入", _Floating, _Hide, 100, 190, 1)]
ID_Ddinsert  [_Button("插入块", RCDATA_16_DINSER, RCDATA_16_DINSER)]^C^C_insert
             [--]
ID_Xref      [_Button("外部参照", RCDATA_16_XREATT, RCDATA_16_XREATT)]^C^C_xref
ID_Image     [_Button("图像", RCDATA_16_IMAGE, RCDATA_16_IMAGE)]^C^C_image
             [--]
ID_Import    [_Button("输入", RCDATA_16_IMPORT, RCDATA_16_IMPORT)]^C^C_import
             [--]
ID_Insertobj [_Button("OLE 对象", RCDATA_16_INSOLE, RCDATA_16_INSOLE)]^C^C_insertobj

**TB_LAYOUTS
ID_TbLayouts [_Toolbar("布局", _Floating, _Hide, 100, 350, 1)]
ID_LayNew    [_Button("新建布局", RCDATA_16_LAYNEW, RCDATA_16_LAYNEW)]^C^C_layout _n
ID_LayTemp   [_Button("来自样板的布局", RCDATA_16_LAYTEM, RCDATA_16_LAYTEM)]^C^C_layout _t
ID_PlotSetup [_Button("页面设置", RCDATA_16_PLTSET, RCDATA_16_PLTSET)]^C^C_pagesetup
ID_VpDialog  [_Button("显示“视口”对话框", RCDATA_16_VPDLG, RCDATA_16_VPDLG)]^C^C_vports

**TB_MODIFY
ID_TbModify  [_Toolbar("修改", _Right, _Show, 0, 0, 1)]
ID_Erase     [_Button("删除", RCDATA_16_ERASE, RCDATA_16_ERASE)]^C^C_erase
ID_Copy      [_Button("复制对象", RCDATA_16_COPYOB, RCDATA_16_COPYOB)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
ID_Mirror    [_Button("镜像", RCDATA_16_MIRROR, RCDATA_16_MIRROR)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
ID_Offset    [_Button("偏移", RCDATA_16_OFFSET, RCDATA_16_OFFSET)]^C^C_offset
ID_Array     [_Button("阵列", RCDATA_16_ARRREC, RCDATA_16_ARRREC)]^C^C_array
ID_Move      [_Button("移动", RCDATA_16_MOVE, RCDATA_16_MOVE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
ID_Rotate    [_Button("旋转", RCDATA_16_ROTATE, RCDATA_16_ROTATE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
ID_Scale     [_Button("缩放", RCDATA_16_SCALE, RCDATA_16_SCALE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
ID_Stretch   [_Button("拉伸", RCDATA_16_STRETC, RCDATA_16_STRETC)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Trim      [_Button("修剪", RCDATA_16_TRIM, RCDATA_16_TRIM)]^C^C_trim
ID_Extend    [_Button("延伸", RCDATA_16_EXTEND, RCDATA_16_EXTEND)]^C^C_extend
ID_BreakSele [_Button("打断于点", RCDATA_16_BREAKATPT, RCDATA_16_BREAKATPT)]^C^C_break \_f \@
ID_Break     [_Button("打断", RCDATA_16_BRE2PT, RCDATA_16_BRE2PT)]^C^C_break
ID_Chamfer   [_Button("倒角", RCDATA_16_CHAMFE, RCDATA_16_CHAMFE)]^C^C_chamfer
ID_Fillet    [_Button("圆角", RCDATA_16_FILLET, RCDATA_16_FILLET)]^C^C_fillet
ID_Explode   [_Button("分解", RCDATA_16_EXPLOD, RCDATA_16_EXPLOD)]^C^C_explode

**TB_MODIFY_II
ID_TbModifII [_Toolbar("修改 II", _Floating, _Hide, 100, 270, 1)]
ID_Draworder [_Button("显示顺序",RCDATA_16_DRWORD,RCDATA_16_DRWORD)]^C^C_draworder
             [--]
ID_Hatchedit [_Button("编辑图案填充", RCDATA_16_HATEDI, RCDATA_16_HATEDI)]^C^C_hatchedit
ID_Pedit     [_Button("编辑多段线", RCDATA_16_PEDIT, RCDATA_16_PEDIT)]^C^C_pedit
ID_Splinedit [_Button("编辑样条曲线", RCDATA_16_SPLEDI, RCDATA_16_SPLEDI)]^C^C_splinedit
             [--]
ID_EAttEdit  [_Button("编辑属性", RCDATA_16_ATTEDI, RCDATA_16_ATTEDI)]^C^C_eattedit
ID_BattMan   [_Button("块属性管理器", RCDATA_16_BATTMAN, RCDATA_16_BATTMAN)]^C^C_BattMan
ID_AttSync   [_Button("同步属性", RCDATA_16_ATTSYNC, RCDATA_16_ATTSYNC)]^C^C_AttSync
ID_EAttExt   [_Button("属性提取", RCDATA_16_EATTEXT, RCDATA_16_EATTEXT)]^C^C_EAttExt

**TB_OBJECT_PROPERTIES
ID_TbObjectP [_Toolbar("对象特性", _Top, _Show, 2, 1, 1)]
ID_CtrlColor [_Control(_Color)]
             [--]
ID_CtrlLinet [_Control(_Linetype)]
             [--]
ID_CtrlLineW [_Control(_Lineweight)]
             [--]
ID_CtrlPStyl [_Control(_PlotStyle)]

**TB_LAYER
ID_TbLayer   [_Toolbar("图层", _Top, _Show, 1, 1, 1)]
ID_Layer     [_Button("图层特性管理器", RCDATA_16_LAYERS, RCDATA_16_LAYERS)]'_layer
ID_CtrlLayer [_Control(_Layer)]
ID_Ai_molc   [_Button("将对象的图层置为当前", RCDATA_16_MOLC, RCDATA_16_MOLC)]^C^C_ai_molc
ID_LayerP    [_Button("上一个图层", RCDATA_16_LAYERP, RCDATA_16_LAYERP)]^C^C_LayerP

**TB_STYLES
ID_TbStyles  [_Toolbar("样式", _Top, _Show, 1, 0, 1)]
ID_Style     [_Button("文字样式管理器", RCDATA_16_TXTSTYLE, RCDATA_16_TXTSTYLE)]'_style
ID_TxtStyle  [_Control(_txtstyle)]
             [--]
ID_Ddim      [_Button("标注样式管理器", RCDATA_16_DIMSTY, RCDATA_16_DIMSTY)]'_dimstyle
ID_DimStyle  [_Control(_dimstyle)]

**TB_OBJECT_SNAP
ID_TbOsnap   [_Toolbar("对象捕捉", _Floating, _Hide, 100, 210, 1)]
ID_Tracking  [_Button("临时追踪点", RCDATA_16_OSNTMP, RCDATA_16_OSNTMP)]_tt
ID_From      [_Button("捕捉自", RCDATA_16_OSNFRO, RCDATA_16_OSNFRO)]_from
             [--]
ID_OsnapEndp [_Button("捕捉到端点", RCDATA_16_OSNEND, RCDATA_16_OSNEND)]_endp
ID_OsnapMidp [_Button("捕捉到中点", RCDATA_16_OSNMID, RCDATA_16_OSNMID)]_mid
ID_OsnapInte [_Button("捕捉到交点", RCDATA_16_OSNINT, RCDATA_16_OSNINT)]_int
ID_OsnapAppa [_Button("捕捉到外观交点", RCDATA_16_OSNAPP, RCDATA_16_OSNAPP)]_appint
ID_OsnapExte [_Button("捕捉到延长线", RCDATA_16_OSNEXT, RCDATA_16_OSNEXT)]_ext
             [--]
ID_OsnapCent [_Button("捕捉到圆心", RCDATA_16_OSNCEN, RCDATA_16_OSNCEN)]_cen
ID_OsnapQuad [_Button("捕捉到象限点", RCDATA_16_OSNQUA, RCDATA_16_OSNQUA)]_qua
ID_OsnapTang [_Button("捕捉到切点", RCDATA_16_OSNTAN, RCDATA_16_OSNTAN)]_tan
             [--]
ID_OsnapPerp [_Button("捕捉到垂足", RCDATA_16_OSNPER, RCDATA_16_OSNPER)]_per
ID_OsnapPara [_Button("捕捉到平行线", RCDATA_16_OSNPAR, RCDATA_16_OSNPAR)]_par
ID_OsnapInse [_Button("捕捉到插入点", RCDATA_16_OSNINS, RCDATA_16_OSNINS)]_ins
ID_OsnapNode [_Button("捕捉到节点", RCDATA_16_OSNNOD, RCDATA_16_OSNNOD)]_nod
             [--]
ID_OsnapNear [_Button("捕捉到最近点", RCDATA_16_OSNNEA, RCDATA_16_OSNNEA)]_nea
ID_OsnapNone [_Button("无捕捉", RCDATA_16_OSNNON, RCDATA_16_OSNNON)]_non
             [--]
ID_Osnap     [_Button("对象捕捉设置", RCDATA_16_OSNAP, RCDATA_16_OSNAP)]'_+dsettings 2

**TB_ORBIT
ID_TbOrbit   [_Toolbar("三维动态观察器", _Floating, _Hide, 100, 350, 1)]
ID_3dpan     [_Button("三维平移", RCDATA_16_3DPAN, RCDATA_16_3DPAN)]'_3dpan
ID_3dzoom    [_Button("三维缩放", RCDATA_16_3DZOOM, RCDATA_16_3DZOOM)]'_3dzoom
ID_3dorbit   [_Button("三维动态观察", RCDATA_16_3DORBIT, RCDATA_16_3DORBIT)]'_3dorbit
ID_3dcorbit  [_Button("三维连续观察", RCDATA_16_3DCORBIT, RCDATA_16_3DCORBIT)]'_3dcorbit
ID_3dswivel  [_Button("三维旋转", RCDATA_16_3DSWIVEL, RCDATA_16_3DSWIVEL)]'_3dswivel
ID_3ddistanc [_Button("三维调整距离", RCDATA_16_3DDISTANCE, RCDATA_16_3DDISTANCE)]'_3ddistance
ID_3dclip    [_Button("三维调整剪裁平面", RCDATA_16_3DCLIP, RCDATA_16_3DCLIP)]'_3dclip
ID_3dclipfr  [_Button("前向剪裁开/关", RCDATA_16_3DCLIPFR, RCDATA_16_3DCLIPFR)]^C^C_dview$M=$(if,$(or,$(eq,$(getvar,tilemode),1),$(!=,$(getvar,cvport),1)),$(if,$(and,$(getvar,viewmode),2),$(if,$(and,$(getvar,viewmode),4), _all  _cl _off _cl _b _on^M, _all  _cl _off^M), _all  _cl _f $(getvar,frontz)^M)^Z)
ID_3dclipbk  [_Button("后向剪裁开/关", RCDATA_16_3DCLIPBK, RCDATA_16_3DCLIPBK)]^C^C_dview$M=$(if,$(or,$(eq,$(getvar,tilemode),1),$(!=,$(getvar,cvport),1)),$(if,$(and,$(getvar,viewmode),4), _all  _cl _b _off^M, _all  _cl _b _on^M)^Z)
             [--]
ID_3dviews   [_Control(_View)]

**TB_SHADING
ID_TbShading [_Toolbar("着色", _Floating, _Hide, 100, 390, 1)]      
ID_2doptim   [_Button("二维线框", RCDATA_16_2DOPTIM, RCDATA_16_2DOPTIM)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe [_Button("三维线框", RCDATA_16_WIREFRAME, RCDATA_16_WIREFRAME)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden    [_Button("消隐", RCDATA_16_HIDDEN, RCDATA_16_HIDDEN)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat      [_Button("平面着色", RCDATA_16_FLAT, RCDATA_16_FLAT)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud   [_Button("体着色", RCDATA_16_GOURAUD, RCDATA_16_GOURAUD)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges [_Button("带边框平面着色", RCDATA_16_FLATEDGES, RCDATA_16_FLATEDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges [_Button("带边框体着色", RCDATA_16_GOUREDGES, RCDATA_16_GOUREDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)

**TB_REFEDIT
ID_TbRefedit [_Toolbar("参照编辑", _Floating, _Hide, 100, 170, 1)]
ID_RefEditor [_Button("编辑块或外部参照", RCDATA_16_REFED_EDIT, RCDATA_16_REFED_EDIT)]^C^C_refedit;
             [--]
             [_Control(_Refblkname)]
             [--]
ID_RefAdd    [_Button("向工作集添加对象", RCDATA_16_REFED_ADD, RCDATA_16_REFED_ADD)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _add;))^Z
ID_RefRemove [_Button("从工作集删除对象", RCDATA_16_REFED_RMV, RCDATA_16_REFED_RMV)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _rem;))^Z
ID_RefDscrd  [_Button("放弃对参照的修改", RCDATA_16_REFED_DISC, RCDATA_16_REFED_DISC)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _disc)
ID_RefSave   [_Button("将修改保存到参照", RCDATA_16_REFED_SAVE, RCDATA_16_REFED_SAVE)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _sav)

**TB_REFERENCE
ID_TbReferen [_Toolbar("参照", _Floating, _Hide, 100, 370, 1)]
ID_Xref      [_Button("外部参照", RCDATA_16_XREATT, RCDATA_16_XREATT)]^C^C_xref
ID_Xattach   [_Button("附着外部参照", RCDATA_16_XATTAC, RCDATA_16_XATTAC)]^C^C_xattach
ID_Xclip     [_Button("外部参照剪裁",RCDATA_16_XRECLI,RCDATA_16_XRECLI)]^C^C_xclip
ID_Xbind     [_Button("外部参照绑定",RCDATA_16_XBIND,RCDATA_16_XBIND)]^C^C_xbind
ID_Xclipfram [_Button("外部参照剪裁边框",RCDATA_16_XCLIPFRAME,RCDATA_16_XCLIPFRAME)]$M=$(if,$(eq,$(getvar,xclipframe),1),^C^C_xclipframe 0,^C^C_xclipframe 1)
             [--]
ID_Image     [_Button("图像", RCDATA_16_IMAGE, RCDATA_16_IMAGE)]^C^C_image
ID_ImageAtta [_Button("附着图像", RCDATA_16_IMGATT, RCDATA_16_IMGATT)]^C^C_imageattach
ID_Imageclip [_Button("图像剪裁",RCDATA_16_IMGCLP, RCDATA_16_IMGCLP)]^C^C_imageclip
ID_Imageadju [_Button("图像调整",RCDATA_16_IMGADJ, RCDATA_16_IMGADJ)]^C^C_imageadjust
ID_Imagequal [_Button("图像质量",RCDATA_16_IMGQUA, RCDATA_16_IMGQUA)]^C^C_imagequality
ID_Transpare [_Button("图像透明",RCDATA_16_TRANSP, RCDATA_16_TRANSP)]^C^C_transparency
ID_Imagefram [_Button("图像边框",RCDATA_16_IMGFRAME, RCDATA_16_IMGFRAME)]^C^C_imageframe

**TB_RENDER
ID_TbRender  [_Toolbar("渲染", _Floating, _Hide, 100, 230, 1)]
ID_Hide      [_Button("消隐", RCDATA_16_HIDE, RCDATA_16_HIDE)]^C^C_hide
             [--]
ID_Render    [_Button("渲染", RCDATA_16_RENDER, RCDATA_16_RENDER)]^C^C_render
             [--]
ID_Scene     [_Button("场景", RCDATA_16_SCENE, RCDATA_16_SCENE)]^C^C_scene
ID_Light     [_Button("光源", RCDATA_16_LIGHT, RCDATA_16_LIGHT)]^C^C_light
ID_Rmat      [_Button("材质", RCDATA_16_RMAT, RCDATA_16_RMAT)]^C^C_rmat
ID_Matlib    [_Button("材质库", RCDATA_16_MATLIB, RCDATA_16_MATLIB)]^C^C_matlib
ID_Setuv     [_Button("贴图", RCDATA_16_SETUV, RCDATA_16_SETUV)]^C^C_setuv
             [--]
ID_Backgroun [_Button("背景", RCDATA_16_BACKGR, RCDATA_16_BACKGR)]^C^C_background
ID_Fog       [_Button("雾化", RCDATA_16_FOG, RCDATA_16_FOG)]^C^C_fog
ID_Lsnew     [_Button("新建配景", RCDATA_16_LSNEW, RCDATA_16_LSNEW)]^C^C_lsnew
ID_Lsedit    [_Button("编辑配景", RCDATA_16_LSEDIT, RCDATA_16_LSEDIT)]^C^C_lsedit
ID_Lslib     [_Button("配景库", RCDATA_16_LSLIB, RCDATA_16_LSLIB)]^C^C_lslib
             [--]
ID_Rpref     [_Button("渲染系统配置", RCDATA_16_RPREF, RCDATA_16_RPREF)]^C^C_rpref
ID_Stats     [_Button("统计信息", RCDATA_16_STATS, RCDATA_16_STATS)]^C^C_stats

**TB_SOLIDS
ID_TbSolids  [_Toolbar("实体", _Floating, _Hide, 100, 250, 1)]
ID_Box       [_Button("长方体", RCDATA_16_BOX, RCDATA_16_BOX)]^C^C_box
ID_Sphere    [_Button("球体", RCDATA_16_SPHERE, RCDATA_16_SPHERE)]^C^C_sphere
ID_Cylinder  [_Button("圆柱体", RCDATA_16_CYLIND, RCDATA_16_CYLIND)]^C^C_cylinder
ID_Cone      [_Button("圆锥体", RCDATA_16_CONE, RCDATA_16_CONE)]^C^C_cone
ID_Wedge     [_Button("楔体", RCDATA_16_WEDGE, RCDATA_16_WEDGE)]^C^C_wedge
ID_Torus     [_Button("圆环", RCDATA_16_TORUS, RCDATA_16_TORUS)]^C^C_torus
             [--]
ID_Extrude   [_Button("拉伸", RCDATA_16_EXTRUD, RCDATA_16_EXTRUD)]^C^C_extrude
ID_Revolve   [_Button("旋转", RCDATA_16_REVOLV, RCDATA_16_REVOLV)]^C^C_revolve
             [--]
ID_Slice     [_Button("剖切", RCDATA_16_SLICE, RCDATA_16_SLICE)]^C^C_slice
ID_Section   [_Button("切割", RCDATA_16_SECTIO, RCDATA_16_SECTIO)]^C^C_section
ID_Interfere [_Button("干涉", RCDATA_16_INTERF, RCDATA_16_INTERF)]^C^C_interfere
             [--]
ID_Soldraw   [_Button("设置图形",RCDATA_16_SOLDR, RCDATA_16_SOLDR)]^C^C_soldraw
ID_Solview   [_Button("设置视图",RCDATA_16_SOLVW, RCDATA_16_SOLVW)]^C^C_solview
ID_Solprof   [_Button("设置轮廓",RCDATA_16_SOLPR, RCDATA_16_SOLPR)]^C^C_solprof

**TB_SOLIDS2
ID_TbSolids2 [_Toolbar("实体编辑", _Floating, _Hide, 100, 250, 1)]
ID_Union     [_Button("并集", RCDATA_16_UNION, RCDATA_16_UNION)]^C^C_union
ID_Subtract  [_Button("差集", RCDATA_16_SUBTRA, RCDATA_16_SUBTRA)]^C^C_subtract
ID_Intersect [_Button("交集", RCDATA_16_INTERS, RCDATA_16_INTERS)]^C^C_intersect
             [--]
ID_FaceExtru [_Button("拉伸面", RCDATA_16_EXTRUD, RCDATA_16_EXTRUD)]^C^C_solidedit _face _extrude
ID_FaceMove  [_Button("移动面", RCDATA_16_MOVEFACE, RCDATA_16_MOVEFACE)]^C^C_solidedit _face _move
ID_FaceOffse [_Button("偏移面", RCDATA_16_OFFSETFACE, RCDATA_16_OFFSETFACE)]^C^C_solidedit _face _offset
ID_FaceDel   [_Button("删除面", RCDATA_16_DELFACE, RCDATA_16_DELFACE)]^C^C_solidedit _face _delete
ID_FaceRotat [_Button("旋转面", RCDATA_16_ROTATEFACE, RCDATA_16_ROTATEFACE)]^C^C_solidedit _face _rotate
ID_FaceTaper [_Button("倾斜面", RCDATA_16_TAPER, RCDATA_16_TAPER)]^C^C_solidedit _face _taper
ID_FaceCopy  [_Button("复制面", RCDATA_16_COPYFACE, RCDATA_16_COPYFACE)]^C^C_solidedit _face _copy
ID_FaceColor [_Button("着色面", RCDATA_16_COLORFACE, RCDATA_16_COLORFACE)]^C^C_solidedit _face _color
             [--]
ID_EdgeCopy  [_Button("复制边", RCDATA_16_COPYEDGE, RCDATA_16_COPYEDGE)]^C^C_solidedit _edge _copy
ID_EdgeColor [_Button("着色边", RCDATA_16_COLOREDGE, RCDATA_16_COLOREDGE)]^C^C_solidedit _edge _color
             [--]
ID_Imprint   [_Button("压印", RCDATA_16_IMPRINT, RCDATA_16_IMPRINT)]^C^C_solidedit _body _imprint
ID_BodyCln   [_Button("清除", RCDATA_16_CLEAN, RCDATA_16_CLEAN)]^C^C_solidedit _body _clean
ID_Separate  [_Button("分割", RCDATA_16_SEPARATE, RCDATA_16_SEPARATE)]^C^C_solidedit _body _separate
ID_Shell     [_Button("抽壳", RCDATA_16_SHELL, RCDATA_16_SHELL)]^C^C_solidedit _body _shell
ID_BodyChk   [_Button("检查", RCDATA_16_CHECK, RCDATA_16_CHECK)]^C^C_solidedit _body _check

**TB_STANDARD
ID_TbStandar [_Toolbar("标准", _Top, _Show, 0, 0, 1)]
ID_QNew      [_Button("新建", RCDATA_16_NEW, RCDATA_16_NEW)]^C^C_qnew
ID_Open      [_Button("打开", RCDATA_16_OPEN, RCDATA_16_OPEN)]^C^C_open
ID_Save      [_Button("保存", RCDATA_16_SAVE, RCDATA_16_SAVE)]^C^C_qsave
             [--]
ID_Print     [_Button("打印", RCDATA_16_PRINT, RCDATA_16_PRINT)]^C^C_plot
ID_Preview   [_Button("打印预览", RCDATA_16_PREVIEW, RCDATA_16_PREVIEW)]^C^C_preview
ID_Pub       [_Button("发布", RCDATA_16_PUBL, RCDATA_16_PUBL)]^C^C_publish
             [--]
ID_Cutclip   [_Button("剪切到剪贴板", RCDATA_16_CUT, RCDATA_16_CUT)]^C^C_cutclip
ID_Copyclip  [_Button("复制到剪贴板", RCDATA_16_COPY, RCDATA_16_COPY)]^C^C_copyclip
ID_Pasteclip [_Button("从剪贴板粘贴", RCDATA_16_PASTE, RCDATA_16_PASTE)]^C^C_pasteclip
ID_Matchprop [_Button("特性匹配", RCDATA_16_MATCH, RCDATA_16_MATCH)]'_matchprop
             [--]
ID_CtrlUndo  [_Control(_Undo)]
ID_CtrlRedo  [_Control(_Redo)]
             [--]
ID_Pan       [_Button("实时平移", RCDATA_16_RTPAN, RCDATA_16_RTPAN)]'_pan
ID_ZoomRealt [_Button("实时缩放", RCDATA_16_RTZOOM, RCDATA_16_RTZOOM)]'_zoom ;
ID_TbZoom    [_Flyout("缩放", RCDATA_16_ZOOM, RCDATA_16_ZOOM, _OtherIcon, IR_gardensSoft.TB_ZOOM)]
ID_ZoomPrevi [_Button("缩放上一个", RCDATA_16_ZOOPRE, RCDATA_16_ZOOPRE)]'_zoom _p             
             [--]
ID_Ai_propch [_Button("特性", RCDATA_16_MODIFY, RCDATA_16_MODIFY)]$M=$(if,$(and,$(>,$(getvar,opmstate),0)),^C^C_propertiesclose,^C^C_properties)             
ID_Content   [_Button("设计中心", RCDATA_16_OPTCONTENTX, RCDATA_16_OPTCONTENTX)]$M=$(if,$(and,$(getvar,adcstate),1),'_adcclose,'_adcenter)
ID_TPalette  [_Button("工具选项板", RCDATA_16_TPALETTE, RCDATA_16_TPALETTE)]$M=$(if,$(and,$(getvar,tpstate),1),'_ToolPalettesClose,'_ToolPalettes)
             [--]
ID_Help      [_Button("帮助", RCDATA_16_HELP, RCDATA_16_HELP)]'_help


**TB_STANDARDS
ID_TbCadStd  [_Toolbar("CAD 标准", _Floating, _Hide, 100, 380, 1)]
ID_Standards [_Button("配置标准", RCDATA_16_CONFIGSTD, RCDATA_16_CONFIGSTD)]^C^C_Standards
ID_CheckStan [_Button("检查标准", RCDATA_16_CHECKSTD, RCDATA_16_CHECKSTD)]^C^C_CheckStandards
ID_LayTrans  [_Button("图层转换", RCDATA_16_LAYTRANS, RCDATA_16_LAYTRANS)]^C^C_LayTrans

**TB_SURFACES
ID_TbSurface [_Toolbar("曲面", _Floating, _Hide, 100, 290, 1)]
ID_Solid     [_Button("二维填充", RCDATA_16_SOLID, RCDATA_16_SOLID)]^C^C_solid
ID_3dface    [_Button("三维面", RCDATA_16_3DFACE, RCDATA_16_3DFACE)]^C^C_3dface
             [--]
ID_Ai_box    [_Button("长方体表面", RCDATA_16_SURBOX, RCDATA_16_SURBOX)]^C^C_ai_box
ID_Ai_wedge  [_Button("楔体表面", RCDATA_16_SURWED, RCDATA_16_SURWED)]^C^C_ai_wedge
ID_Ai_pyrami [_Button("棱锥面", RCDATA_16_SURPYR, RCDATA_16_SURPYR)]^C^C_ai_pyramid
ID_Ai_cone   [_Button("圆锥面", RCDATA_16_SURCON, RCDATA_16_SURCON)]^C^C_ai_cone
ID_Ai_sphere [_Button("球面", RCDATA_16_SURSPH, RCDATA_16_SURSPH)]^C^C_ai_sphere
ID_Ai_dome   [_Button("上半球面", RCDATA_16_SURDOM, RCDATA_16_SURDOM)]^C^C_ai_dome
ID_Ai_dish   [_Button("下半球面", RCDATA_16_SURDIS, RCDATA_16_SURDIS)]^C^C_ai_dish
ID_Ai_torus  [_Button("圆环面", RCDATA_16_SURTOR, RCDATA_16_SURTOR)]^C^C_ai_torus
             [--]
ID_Edge      [_Button("边", RCDATA_16_EDGE, RCDATA_16_EDGE)]^C^C_edge
ID_3dmesh    [_Button("三维网格", RCDATA_16_3DMESH, RCDATA_16_3DMESH)]^C^C_3dmesh
             [--]
ID_Revsurf   [_Button("旋转曲面", RCDATA_16_REVSUR, RCDATA_16_REVSUR)]^C^C_revsurf
ID_Tabsurf   [_Button("平移曲面", RCDATA_16_TABSUR, RCDATA_16_TABSUR)]^C^C_tabsurf
ID_Rulesurf  [_Button("直纹曲面", RCDATA_16_RULESU, RCDATA_16_RULESU)]^C^C_rulesurf
ID_Edgesurf  [_Button("边界曲面", RCDATA_16_EDGESU, RCDATA_16_EDGESU)]^C^C_edgesurf

**TB_TEXT
ID_TbText    [_Toolbar("文字", _Floating, _Hide, 100, 320, 1)]
ID_Mtext     [_Button("多行文字", RCDATA_16_MTEXT, RCDATA_16_MTEXT)]^C^C_mtext
ID_Dtext     [_Button("单行文字", RCDATA_16_SINGLE_DTEXT, RCDATA_16_SINGLE_DTEXT)]^C^C_dtext
ID_Ddedit    [_Button("编辑文字", RCDATA_16_TEXEDI, RCDATA_16_TEXEDI)]^C^C_ddedit
ID_TextFind  [_Button("查找和替换", RCDATA_16_TEXTFIND, RCDATA_16_TEXTFIND)]^C^C_find
ID_Style     [_Button("文字样式",RCDATA_16_TXTSTYLE, RCDATA_16_TXTSTYLE)]'_style
ID_Scaletext [_Button("缩放文字", RCDATA_16_SCALETXT, RCDATA_16_SCALETXT)]^C^C_scaletext
ID_Justifyte [_Button("对正文字", RCDATA_16_JUSTIFYTXT, RCDATA_16_JUSTIFYTXT)]^C^C_justifytext
ID_Spacetran [_Button("在空间之间转换距离",RCDATA_16_SPACETRANS, RCDATA_16_SPACETRANS)]'_spacetrans

**TB_UCS
ID_TbUcs     [_Toolbar("UCS", _Floating, _Hide, 100, 310, 1)]
ID_Ucs       [_Button("UCS", RCDATA_16_UCS, RCDATA_16_UCS)]^C^C_ucs
ID_Dducs     [_Button("显示 UCS 对话框", RCDATA_16_DDUCS, RCDATA_16_DDUCS)]^C^C_+ucsman 0
             [--]
ID_UcsPrevio [_Button("上一个 UCS ", RCDATA_16_UCSPRE, RCDATA_16_UCSPRE)]^C^C_ucs _p
             [--]
ID_UcsWorld  [_Button("世界 UCS", RCDATA_16_UCSW, RCDATA_16_UCSW)]^C^C_ucs _w
ID_UcsObject [_Button("对象 UCS", RCDATA_16_UCSOBJ, RCDATA_16_UCSOBJ)]^C^C_ucs _ob
ID_UcsFace   [_Button("面 UCS", RCDATA_16_UCSFACE, RCDATA_16_UCSFACE)]^C^C_ucs _fa
ID_UcsView   [_Button("视图 UCS", RCDATA_16_UCSVIE, RCDATA_16_UCSVIE)]^C^C_ucs _v
             [--]
ID_UcsOrigin [_Button("原点 UCS", RCDATA_16_UCSORI, RCDATA_16_UCSORI)]^C^C_ucs _o
ID_UcsZAxVec [_Button("Z 轴矢量 UCS", RCDATA_16_UCSZAV, RCDATA_16_UCSZAV)]^C^C_ucs _zaxis
ID_Ucs3point [_Button("三点 UCS", RCDATA_16_UCS3PT, RCDATA_16_UCS3PT)]^C^C_ucs _3
             [--]
ID_UcsXAxRot [_Button("X 轴旋转 UCS", RCDATA_16_UCSXAR, RCDATA_16_UCSXAR)]^C^C_ucs _x
ID_UcsYAxRot [_Button("Y 轴旋转 UCS", RCDATA_16_UCSYAR, RCDATA_16_UCSYAR)]^C^C_ucs _y
ID_UcsZAxRot [_Button("Z 轴旋转 UCS", RCDATA_16_UCSZAR, RCDATA_16_UCSZAR)]^C^C_ucs _z
             [--]
ID_UcsApply  [_Button("应用 UCS", RCDATA_16_UCSAPPLY, RCDATA_16_UCSAPPLY)]^C^C_ucs _apply

**TB_UCSII
ID_TbUcsName [_Toolbar("UCS II", _Floating, _Hide, 100, 300, 1)]
ID_Dducs     [_Button("显示 UCS 对话框", RCDATA_16_DDUCS, RCDATA_16_DDUCS)]^C^C_+ucsman 0
ID_UcsMove   [_Button("移动 UCS 原点", RCDATA_16_UCSMOVE, RCDATA_16_UCSMOVE)]^C^C_ucs _move
             [--]
ID_UcsCombo  [_Control(_UCSManager)]

**TB_VIEWPOINT
ID_TbViewpoi [_Toolbar("视图", _Floating, _Hide, 100, 330, 1)]
ID_Ddview    [_Button("命名视图", RCDATA_16_DDVIEW, RCDATA_16_DDVIEW)]^C^C_view
             [--]
ID_VpointTop [_Button("俯视图", RCDATA_16_VIETOP, RCDATA_16_VIETOP)]^C^C_-view _top
ID_VpointBot [_Button("仰视图", RCDATA_16_VIEBOT, RCDATA_16_VIEBOT)]^C^C_-view _bottom
ID_VpointLef [_Button("左视图", RCDATA_16_VIELEF, RCDATA_16_VIELEF)]^C^C_-view _left
ID_VpointRig [_Button("右视图", RCDATA_16_VIERIG, RCDATA_16_VIERIG)]^C^C_-view _right
ID_VpointFro [_Button("主视图", RCDATA_16_VIEFRO, RCDATA_16_VIEFRO)]^C^C_-view _front
ID_VpointBac [_Button("后视图", RCDATA_16_VIEBAC, RCDATA_16_VIEBAC)]^C^C_-view _back
             [--]
ID_VpointSW  [_Button("西南等轴测视图", RCDATA_16_VIESWI, RCDATA_16_VIESWI)]^C^C_-view _swiso
ID_VpointSE  [_Button("东南等轴测视图", RCDATA_16_VIESEI, RCDATA_16_VIESEI)]^C^C_-view _seiso
ID_VpointNE  [_Button("东北等轴测视图", RCDATA_16_VIENEI, RCDATA_16_VIENEI)]^C^C_-view _neiso
ID_VpointNW  [_Button("西北等轴测视图", RCDATA_16_VIENWI, RCDATA_16_VIENWI)]^C^C_-view _nwiso
             [--]
ID_Camera    [_Button("相机", RCDATA_16_CAMERA, RCDATA_16_CAMERA)]^C^C_camera

**TB_VIEWPORTS
ID_TbVpCreat [_Toolbar("视口", _Floating, _Hide, 100, 350, 1)]
ID_VpDialog  [_Button("显示“视口”对话框", RCDATA_16_VPDLG, RCDATA_16_VPDLG)]^C^C_vports
ID_VpSingle  [_Button("单个视口", RCDATA_16_VPONE, RCDATA_16_VPONE)]$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_VpPoly    [_Button("多边形视口", RCDATA_16_VPPOLY, RCDATA_16_VPPOLY)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _p,^C^C^P(ai_viewports_alert)^P) 
ID_VpConvert [_Button("将对象转换为视口", RCDATA_16_VPOBJ, RCDATA_16_VPOBJ)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _o,^C^C^P(ai_viewports_alert)^P)
ID_VpClip    [_Button("剪裁现有视口", RCDATA_16_VPCLIP, RCDATA_16_VPCLIP)]^C^C_vpclip
             [--]
ID_VPScale   [_Control(_ViewportScale)]

**TB_WEB
ID_TbWeb     [_Toolbar("Web", _Floating, _Hide, 100, 380, 1)]
ID_HlnkBack  [_Button("后退", RCDATA_16_HLNK_BACK, RCDATA_16_HLNK_BACK)]'_hyperlinkBack
ID_HlnkFwd   [_Button("前进", RCDATA_16_HLNK_FWD, RCDATA_16_HLNK_FWD)]'_hyperlinkFwd
ID_HlnkStop  [_Button("停止浏览", RCDATA_16_HLNK_STOP, RCDATA_16_HLNK_STOP)]'_hyperlinkStop
ID_Browser   [_Button("浏览 Web", RCDATA_16_WEB, RCDATA_16_WEB)]^C^C_browser ;

**TB_ZOOM
ID_TbZoom    [_Toolbar("缩放", _Floating, _Hide, 100, 350, 1)]
ID_ZoomWindo [_Button("窗口缩放", RCDATA_16_ZOOWIN, RCDATA_16_ZOOWIN)]'_zoom _w
ID_ZoomDynam [_Button("动态缩放", RCDATA_16_ZOODYN, RCDATA_16_ZOODYN)]'_zoom _d
ID_ZoomScale [_Button("比例缩放", RCDATA_16_ZOOSCA, RCDATA_16_ZOOSCA)]'_zoom _s
ID_ZoomCente [_Button("中心缩放", RCDATA_16_ZOOCEN, RCDATA_16_ZOOCEN)]'_zoom _c
             [--]
ID_ZoomIn    [_Button("放大", RCDATA_16_ZOOIN, RCDATA_16_ZOOIN)]'_zoom 2x
ID_ZoomOut   [_Button("缩小", RCDATA_16_ZOOOUT, RCDATA_16_ZOOOUT)]'_zoom .5x
             [--]
ID_ZoomAll   [_Button("全部缩放", RCDATA_16_ZOOALL, RCDATA_16_ZOOALL)]'_zoom _all
ID_ZoomExten [_Button("范围缩放", RCDATA_16_ZOOEXT, RCDATA_16_ZOOEXT)]'_zoom _e


//
//     Begin AutoCAD Image Menus
//

***image
**image_3DObjects
[三维对象]
[IR_gardensSoft(Box3d,长方体表面)]^C^C_ai_box
[IR_gardensSoft(Pyramid,棱锥面)]^C^C_ai_pyramid
[IR_gardensSoft(Wedge,楔体表面)]^C^C_ai_wedge
[IR_gardensSoft(Dome,上半球面)]^C^C_ai_dome
[IR_gardensSoft(Sphere,球面)]^C^C_ai_sphere
[IR_gardensSoft(Cone,圆锥面)]^C^C_ai_cone
[IR_gardensSoft(Torus,圆环面)]^C^C_ai_torus
[IR_gardensSoft(Dish,下半球面)]^C^C_ai_dish
[IR_gardensSoft(Mesh,网格)]^C^C_ai_mesh

**image_poly
[设置样条曲线拟合变量]
[IR_gardensSoft(pm-quad,二次拟合网格)]'_surftype 5
[IR_gardensSoft(pm-cubic,三次拟合网格)]'_surftype 6
[IR_gardensSoft(pm-bezr,Bezier 拟合网格)]'_surftype 8
[IR_gardensSoft(pl-quad,二次拟合多段线)]'_splinetype 5
[IR_gardensSoft(pl-cubic,三次拟合多段线)]'_splinetype 6

**image_vporti
[平铺视口布局]
[IR_gardensSoft(vport-1,一个)]^C^C(ai_tiledvp 1 nil)
[IR_gardensSoft(vport-3v,三个:  垂直)]^C^C(ai_tiledvp 3 "_V")
[IR_gardensSoft(vport-3h,三个:  水平)]^C^C(ai_tiledvp 3 "_H")
[IR_gardensSoft(vport-4,四个:  相等)]^C^C(ai_tiledvp 4 nil)
[IR_gardensSoft(vport-2v,两个:  垂直)]^C^C(ai_tiledvp 2 "_V")
[IR_gardensSoft(vport-3r,三个:  右)]^C^C(ai_tiledvp 3 "_R")
[IR_gardensSoft(vport-3l,三个:  左)]^C^C(ai_tiledvp 3 "_L")
[IR_gardensSoft(vport-4l,四个:  左)]^C^C(ai_tiledvp 4 "_L")
[IR_gardensSoft(vport-2h,两个:  水平)]^C^C(ai_tiledvp 2 "_H")
[IR_gardensSoft(vport-3a,三个:  上)]^C^C(ai_tiledvp 3 "_A")
[IR_gardensSoft(vport-3b,三个:  下)]^C^C(ai_tiledvp 3 "_B")
[IR_gardensSoft(vport-4r,四个:  右)]^C^C(ai_tiledvp 4 "_R")

//
//  AutoCAD Screen Menus
//
//  There are two types of screen menus: command menus and options menus
//  Command menus provide access to the lists of AutoCAD commands.
//  Options menus provides access to the options available for individual commands.
//
//  There are 22 lines between menu titles.  This is one method for assuring that each time
//  that a menu is called that it overwrites the previous menu.
//
//  The organization of the command menus generally follows the organization of the pull-down menus.
//  A command has a screen menu item only if it has a pull-down menu item.
//  Command menus have, as much as possible, the same name as the equivalent pull-down menu.
//  Command menus have, as much as possible, the same items in the same order as the pull-down menus.
//
//  Command menus generally use the command name while pull-down menus offer a more descriptive title.
//  Items in command menus that call other command menus are in upper case.
//
//  Command menu names start with a number and are located after the special menus.
//
***SCREEN
**S
[HCAD]^C^C^P(ai_rootmenus) ^p
[* * * *]$S=IR_gardensSoft.S_HCADOsnap
[系    统]$S=IR_gardensSoft.S_HCADSYS

[道    路]$S=IR_gardensSoft.S_HCADROAD

[绿    化]$S=IR_gardensSoft.S_HCADLH

[园    林]$S=IR_gardensSoft.S_HCADYL

[地    块]$S=IR_gardensSoft.S_HCADPOLT

[建    筑]$S=IR_gardensSoft.S_HCADARCH

[三    维]$S=IR_gardensSoft.S_HCADThreeD

[竖    向]$S=IR_gardensSoft.S_HCADVERTICAL

[标    注]$S=IR_gardensSoft.S_HCADDIM

[工    具]$S=IR_gardensSoft.S_HCADTOOL

[指    标]$S=IR_gardensSoft.S_HCADINDEX

[做 法 图]$S=IR_gardensSoft.S_HCADZFT

[图库中心]$S=IR_gardensSoft.S_HCADTK

[帮    助]$S=IR_gardensSoft.S_HCADHELP


















**S_HCADOsnap 3
[端点(&E)]_endp
[中点(&M)]_mid
[交点(&I)]_int
[外观交点(&A)]_appint
[延长线(&X)]_ext

[圆心(&C)]_cen
[象限点(&Q)]_qua
[切点(&G)]_tan

[垂足(&P)]_per
[平行线(&L)]_par
[节点(&D)]_nod
[插入点(&S)]_ins
[最近点(&R)]_nea
[无(&N)]_non
 
[对象捕捉设置(&O)...]'_+dsettings 2







[上一个  ]$S=


**S_HCADSYS 3
[系统初始化]^C^C^P_SYSTEMINIT
[绘制图框]^C^C^P_DRAWFRAME
[设置坐标]^C^C^P_SETCOORDINATE
[绘制坐标网]^C^C^P_DRAWCOORNET 
[指北针]^C^C^P_INSERTNORTHPIN
[比例尺]^C^C^P_INSERTSCALE
[风玫瑰]^C^C^P_INSERTWINDOWROSE
[UCS图标开关]^C^C^P_SHOWHIDEUCSICON
[工具栏]^C^C_toolbar
[热键自定义]^C^C_HCADSHORTCUT
[窗口菜单]^C^C^P_HCADMENU

[切换到ACAD菜单]^C^C^P_MENUSHIFTCAD













[上一个  ]$S=


**S_HCADROAD 3 
[道路绘制]^C^C^P_DRAWROAD
[绘制喇叭口]^C^C^P_DRAWROADBUGLE
[删除喇叭口]^C^C^P_DELROADBUGLE
[绘制车港]^C^C^P_DRAWROADHARBOR
[删除车港]^C^C^P_DELROADHARBOR 
[分隔带]$S=IR_gardensSoft.S_HCADFGD
[沿路布置树]^C^C^P_DISPOSETREEONTHEWAY
[沿线布置树]^C^C^P_DISPOSETREEONTHELINE
 
[道路统计]^C^C^P_CALROADTOTAL
[查看道路]^C^C^P_LOOKFORROADDATA
[属性查询修改]^C^C^P_ROADATTRMODIFY
[道路圆角修改]^C^C^P_MODIFYROADRADIUS
[半径修改]^C^C^P_MODIFYRADIUS
[倒圆切角]^C^C^P_CLIPCIRCLEANGLE
[圆切转换]^C^C^P_TRANSVCIRCELANGLE
[道路修剪]^C^C^P_ROADTRIM
[道路色块填充]^C^C^P_ROADCOLORFILL
[色块填充补充]^C^C^P_FILLROADMAKEUP
[道路示意填充]^C^C^P_ROADHINTFILL
[色块显示开关]^C^C^P_SHOWHIDECOLORFILL
[示意显示开关]^C^C^P_SHOWHIDEHINTFILL
[中心线显示开关]^C^C^P_SHOWHIDECENTERROAD

[曲线要素标注]^C^C^P_DIMCURVEELEMENT
[曲线要素编辑]^C^C^P_EDITCURVEELEMENT
[曲线要素表]^C^C^P_DRAWCURVEELETABLE
[道路一览表]^C^C^P_ROADSCHEDULE
[道路断面]^C^C^P_DRAWTRANSECT

[铁路绘制]^C^C^P_DRAWRAILROAD

[上一个  ]$S=

**S_HCADLH 3 
[点状草坪]^C^C^P_DRAWDOTSHAPELAWN
[绘制草坪]^C^C^P_DRAWGRASSLAWN
[填充草坪]^C^C^P_FILLGRASSLAWN
[绿篱绘制]^C^C^P_DRAWGREENFENSE
[绿篱统计]^C^C^P_CALFENSELEN

[单棵树木]^C^C^P_INSERTTREE
[沿线树木]^C^C^P_DISPOSETREEONTHELINE
[区域树木]^C^C^P_REGIONDISPOSETREE
[树木重合剪切]^C^C^P_CLIPTREESUPERPOSE
[树木阴影绘制]^C^C^P_DRAWTREESHADOW
[图块沿线布置]^C^C^P_DISPOSEALONGLINE
[树木缩放]^C^C^P_SCALETREESIZE
[图块缩放]^C^C^P_SCALEBLOCK
[树木替换]^C^C^P_REPLACETREE
[图块替换]^C^C^P_REPLACEBLOCK
[树木查找]^C^C^P_FINDTREE
[树木标注]^C^C^P_DIMTREE
[树木统计表]^C^C^P_TREESCHEDULE

[绘制乔灌木]^C^C^P_DRAWARBORFRUTEX
[绘制花]^C^C^P_DRAWFLOWER
[绘制竹类]^C^C^P_DRAWBAMBOO



[上一个  ]$S=

**S_HCADYL 3
[直道绘制]^C^C^P_DRAWLINEROAD
[自由小路]^C^C^P_DRAWGARDENSROAD
[碎石路]^C^C^P_DRAWGRAVELROAD
[台阶路]^C^C^P_DRAWSTEPROAD
[汀步]^C^C^P_DRAWTINGBU
[桥梁]^C^C^P_DRAWBRIDGE
[水域]^C^C^P_DRAWWATERBANK
[路灯]^C^C^P_DISLAMPONLINE

[交叉处理]^C^C^P_GENERALKICKPLEAT
[非常规开叉]^C^C^P_NOTGENERALKICKPLEAT
[图案填充标注]^C^C^P_FILLDIM
[填充图案编辑]^C^C^P_EDITFILLHATCH
[面积统计]^C^C^P_CALHATCHAREA

[路牙绘制]^C^C^P_DRAWDANTUWALL
[游廊绘制]^C^C^P_DRAWTRAVELPORCH
[花架绘制]^C^C^P_DRAWARCHSHINPORCH
[台阶绘制]^C^C^P_DRAWARCHSTEP
[廊柱绘制]^C^C^P_DRAWARCHPORCH
[围墙绘制]^C^C^P_DRAWARCHFENCE
[管线绘制]^C^C^P_DRAWPIPE
[景观分析线]^C^C^P_SIGHTANALYSELINE






[上一个  ]$S=


**S_HCADPOLT 3
[用地红线]^C^C^P_DRAWREDLINE

[地块生成]^C^C^P_CREATEPOLT
[红线回退]^C^C^P_REDLINEBACK
[地块选择填充]^C^C^P_FILLSPLOT
[地块类别填充]^C^C^P_FILLTPLOT
[地块范围填充]^C^C^P_FILLSELALLPLOT
[全部地块填充]^C^C^P_FILLPLOT
[填充显示开关]^C^C^P_SHOWPLOTPATTERN
[地块属性查询]^C^C^P_QUERYPLOTATTR
[地块属性标注]^C^C^P_PLOTATTRDIM

[指标统计表]^C^C^P_DRAWINDEXTABLE
[村庄用地计算表]^C^C^P_DRAWVILLAGETABLE
[集镇用地计算表]^C^C^P_DRAWCITYTABLE
[居住区用地平衡表]^C^C^P_DRAWHABITTABLE
[城市建设用地平衡表]^C^C^P_DRAWCITYBPOLTTABLE
[总体规划用地汇总表]^C^C^P_DRAWALLCOLLECT

[制作图则]^C^C^P_LEGALDRAWROLE
[部分保存]^C^C^P_PARKSAVE





[上一个  ]$S=


**S_HCADARCH 3
[绘制建构筑]^C^C^P_DRAWARCH
[单体建筑调用]^C^C^P_SINGLEARCHINSERT
[属性查询修改]^C^C^P_QUERYMODIFYARCH
[建构筑一览表]^C^C^P_CALARCHAREA
[建筑填充]^C^C^P_FILLARCH

[绘制回车场]^C^C^P_DRAWTURNAROUND
[绘制停车场]^C^C^P_DRAWPARK
[沿线停车]^C^C^P_DISPCARONLINE


















[上一个  ]$S=

**S_HCADThreeD 3 
[三维转换]^C^C^P_TRANSTHREEDIMEN
[三维视角]^C^C^P_THREEDIMENBAR
[设置高度]^C^C^P_SETARCHTHICKNESS
[垂直复制]^C^C^P_ZAXISCOPY
[垂直移动]^C^C^P_ZAXISMOVE

[三维树]^C^C^P_INSERTSWTREE
[三维行人]^C^C^P_INSERTSWPERSON
[三维路灯]^C^C^P_INSERTSWLAMP
[三维汽车]^C^C^P_INSERTSWCAR
[三维船]^C^C^P_INSERTSWBOAT
[三维飞机]^C^C^P_INSERTSWAIRPLANE
[三维园林亭]^C^C^P_INSERTSWBOOTH
[三维游乐设施]^C^C^P_INSERTSWAMUSEMENTPARK


[采集等高线]^C^C^P_GATHERLYCONTOURLINE
[离散等高线]^C^C^P_SCATTERDCONTOURLINE
[地表建模]^C^C^P_BUILDLYSURFACEMODEL
[绿化附地]^C^C^P_GARDENSATTACHSURFACE
[绿化附模]^C^C^P_GARDENSATTACHS








[上一个  ]$S=



**S_HCADVERTICAL 3 
[定义标高点]^C^C^P_DEFINESCATTERPOINT
[采集点标高]^C^C^P_GATHERDESIGNPOINT
[导入标高]^C^C^P_IMPORTDESIGNELE
[定义等高线]^C^C^P_DEFINECONTOURLINE
[离散等高线]^C^C^P_SCATTERDCONTOURLINE
[任意点标高]^C^C^P_CALRANDOMPTDESIGNELE
 
[室外标高标注]^C^C^P_DIMELEVATION
[室外坡度标注]^C^C^P_DIMGRADE

[管线布置]^C^C^P_DRAWPIPELINE
[长度统计]^C^C^P_MEASUREDISTANCE
[标高输入]^C^C^P_INPUTPIPEELE
[平面间距计算]^C^C^P_CALPIPEHSPACE
[管线碰撞检查]^C^C^P_CHECKPIPECOLLISION
[管线标注]^C^C^P_PIPEDIM
[标高标注]^C^C^P_DIMPIPEELE
[管线图例制表]^C^C^P_PIPECUTLINETABLE









[上一个  ]$S=


**S_HCADFGD 3
[逐个绘制]^C^C^P_DRAWFGD
[自动绘制]^C^C^P_DRAWFGDAUTO
[单线修剪]^C^C^P_BELTSINGLELINETRIM
[双线修剪]^C^C^P_BELTTWOLINETRIM
[分隔带填充]^C^C^P_FILLBELT


























[上一个  ]$S=


**S_HCADDIM 3
[曲线文字]^C^C^P_CURVETEXT
[坐标标注]$S=IR_gardensSoft.S_COORDINATEDIM 

[标高标注]^C^C^P_DIMELEVATION
[标高编辑]^C^C^P_EDITELEVATION
[坡度标注]^C^C^P_DIMGRADE
[编号标注]^C^C^P_DIMSERIALNO
[层数标注]^C^C^P_ARCHFLOORDIM
[切换层数]^C^C^P_SHIFTARCHFLOORDIM
[±0.00标注]^C^C^P_ZFSIGNDIM
[截取标注]^C^C^P_INTERCEPTDIM
[竖向标注]^C^C^P_DIMVECTICAL

[道路宽度标注一]^C^C^P_ROADWIDTHDIM
[道路宽度标注二]^C^C^P_ROADWIDTHDIMTWO

 







[上一个  ]$S=


**S_COORDINATEDIM 3
[XY标注]^C^C^P_XYDIM
[AB标注]^C^C^P_ABDIM
[旁注XY值]^C^C^P_BXYDIM
[旁注AB值]^C^C^P_BABDIM
[合并标注]^C^C^P_UNITEDIM
[分开标注]^C^C^P_DISPARTDIM
[坐标编辑]^C^C^P_EDITDIM
[坐标置换]^C^C^P_PERMUTEDIM
[切换标注]^C^C^P_SHIFTDIM
[移动标注]^C^C^P_MOVEDIM
[调整标角]^C^C^P_ADJUSTANGLE
[显示隔号]^C^C^P_SHOWMARK
[隐藏隔号]^C^C^P_HIDEMARK
[坐标表]^C^C^P_DRAWCOORDTABLE
[参数设置]^C^C^P_COORDPARASET











[上一个  ]$S=

**S_HCADTOOL 3
[工具箱]$S=IR_gardensSoft.S_HCADTOOLSUB
[层处理器]$S=IR_gardensSoft.S_HCADLAYER	  
[提取实体参数]^C^C^P_DISTILLENTPARA
[部分保存]^C^C^P_PARKSAVE
[面积统计标注]^C^C^P_CALHATCHAREA
[测量长度]^C^C^P_MEASUREDISTANCE
[测量面积]^C^C^P_MEASUREAREA
[制表器]^C^C^P_NEWTABLE 
[风玫瑰生成器]^C^C^P_MAKEWINDROSE

[设置高度]^C^C^P_SETARCHTHICKNESS
[三维视角]^C^C^P_THREEDIMENBAR
[垂直复制]^C^C^P_ZAXISCOPY
[垂直移动]^C^C^P_ZAXISMOVE
[保存视窗\tCtrl+1]^C^C^P_SAVEVIEWWINDOW
[管理视窗\tCtrl+2]^C^C^P_MANVIEWWINDOW
[组开关\tCtrl+A]^C^C^P_GROUPONOFF

 










[上一个  ]$S=


**S_HCADTOOLSUB 3
[线段聚合]^C^C^P_CONVERGEENTITY
[绘制线]^C^C^P_DRAWGARDENSLINE
[线拟合]^C^C^P_PEDITFPLINE
[半径修改]^C^C^P_MODIFYRADIUS
[倒圆切角]^C^C^P_CLIPCIRCLEANGLE
[圆切转换]^C^C^P_TRANSVCIRCELANGLE
[直线双偏移]^C^C^P_LINEBOTHOFFEST
[直线组偏移]^C^C^P_LINETEAMOFFEST
[多义线挖空]^C^C^P_OUTLINEOFPLINE

[线宽调整]^C^C^P_LINEWEIGHTADJUST
[字高调整]^C^C^P_TEXTADJUST
[特殊填充色块]^C^C^P_FILLCOLORPATTERN
[填充图案编辑]^C^C^P_EDITFILLHATCH
[制作无名块]^C^C^P_MAKENONAMEBLOCK
[沿线布置]^C^C^P_DISPOSEALONGLINE
[块替换]^C^C^P_REPLACEBLOCK
[块缩放]^C^C^P_SCALEBLOCK
[块统计]^C^C^P_CALBLOCKNUM
[改块颜色]^C^C^P_MODIFYBLOCKCOLOR
[编辑块]^C^C^P_ADDDELBLOCKREFOBJECT

[置前显示]^C^C^P_DRAWFRONTORDER
[置后显示]^C^C^P_DRAWBACKORDER
[调整显示次序]^C^C^P_ADJUSTDRAWORDER
[Z轴为零]^C^C^P_SETZAXISCOORDINATE




[上一个  ]$S=

 

**S_HCADLAYER 3
[显示全部层]^C^C^P_ONALLLAYER
[显示指定层]^C^C^P_ONONELAYER
[关闭指定层]^C^C^P_OFFONELAYER
[设定当前层]^C^C^P_SELONELAYER
[归属指定层]^C^C^P_ATTACHLAYER
[合并相关层]^C^C^P_UNITELAYER
[分解相关层]^C^C^P_DECOMPOSELAYER
[删除指定层]^C^C^P_DELETELAYER
[层显示记忆]^C^C^P_MEMORYLAYER




















[上一个  ]$S=



**S_HCADINDEX 3
[城市经济技术指标表]^C^C^P_ECONOMYINDEX
[规划综合技术指标表]^C^C^P_COLLIGATEINDEX
[公用工程指标表]^C^C^P_PUBLICPROJECTINDEX

[总用地面积]^C^C^P_CALGHPOLTAREA
[建构筑面积]^C^C^P_CALCONSTRUCTJZAREA
[建构筑占地面积]^C^C^P_CALCONSTRUCTZDAREA
[绿化面积]^C^C^P_CALVIRESCENCEAREA
[地块建筑密度]^C^C^P_CALPOLTARCHDENSITY
[地块建筑容积率]^C^C^P_CALPOLTARCHCUBAGE
[地块绿地率]^C^C^P_CALVIRESCENCERADIO













[上一个  ]$S=



**S_HCADZFT 3
[园路铺装]^C^C^P_INSERTYUANROADSPREAD
[台阶]^C^C^P_INSERTSIDESTEP
[挡土墙]^C^C^P_INSERTEARTHWALL
[浮雕]^C^C^P_INSERTRILIEVO
[休息亭]^C^C^P_INSERTRESTBOOTH
[花架]^C^C^P_INSERTFLOWERFRAME
[花坛]^C^C^P_INSERTZBORDER
[桌凳]^C^C^P_INSERTDESKCHAIR
[水池]^C^C^P_INSERTCISTERN
[假山]^C^C^P_INSERTROCKERY
[建筑小品]^C^C^P_INSERTZARCHSKETCH
[儿童活动场]^C^C^P_INSERTENFANTSTAGE
[室外构造]^C^C^P_INSERTZOUTSTRUCTURE
[建筑大样]^C^C^P_INSERTZARCHDETAILDRAW
[檐口大样]^C^C^P_INSERTZCORNICEDETAILDRAW
[水泵详图]^C^C^P_INSERTZPUMPDETAILDRAW










[上一个  ]$S=


**S_HCADTK 3
[图库中心...]^C^C^P_GALLERYCENTER
[花坛]^C^C^P_INSERTPARTERRE
[平面树]^C^C^P_INSERTPMTREE
[平面灯]^C^C^P_INSERTPMLAMP
[平面车]^C^C^P_INSERTPMCAR
[绿化亭]^C^C^P_INSERTPMBOOTH
[建筑小品]^C^C^P_INSERTARCHSKETCH
[场地小品]^C^C^P_INSERTFIELDSKETCH
[景点]^C^C^P_INSERTSIGHT
[运动场]^C^C^P_INSERTPMPLAYGROUND
[分规符号]^C^C^P_INSERTRULESIGN
[服务设施]^C^C^P_INSERTSERVEESTAB
[工程设施]^C^C^P_INSERTPROJECTESTAB
[道路方向符]^C^C^P_INSERTROADSIGN
[西式元素]^C^C^P_INSERTWSTYLEELEMENT

[立面树]^C^C^P_INSERTLMTREE
[立面灯]^C^C^P_INSERTLMLAMP
[立面车]^C^C^P_INSERTLMCAR
[立面人]^C^C^P_INSERTLMPERSON
[立面盆景]^C^C^P_INSERTLMBONSAI
[立面石堆]^C^C^P_INSERTLMSTONESTACK
[竖向详图]^C^C^P_INSERTLMVDRAWING

[三维树]^C^C^P_INSERTSWTREE
[三维路灯]^C^C^P_INSERTSWLAMP
[自定义...]^C^C^P_DEFINEGALLERYCENTER



[上一个  ]$S=

**S_HCADHELP 3
[在线帮助\tCtrl+F1]^C^C^P_OPENHCADHELP
[功能演示\tCtrl+F2]^C^C^P_OPENHCADREADME
[规范\tCtrl+F3]^C^C^P_OPENHCADGF
[公司信息]^C^C^P_SHOWCOMPANYINFO




















[上一个  ]$S=



**ENDSCREEN

//
//      Begin AutoCAD Tablet Menus
//
//      This is the TABLET1 menu.  You may put your own
//      macros and menu items here in these spaces.
//      All of the "blank" line items actually contain a
//      backslash so that no command is issued when you pick any
//      of them from the tablet.  Remove them if you want an Enter
//      to happen when they are selected, or place your own
//      macros in their place.

***TABLET1
**TABLET1STD
[A-1]\
[A-2]\
[A-3]\
[A-4]\
[A-5]\
[A-6]\
[A-7]\
[A-8]\
[A-9]\
[A-10]\
[A-11]\
[A-12]\
[A-13]\
[A-14]\
[A-15]\
[A-16]\
[A-17]\
[A-18]\
[A-19]\
[A-20]\
[A-21]\
[A-22]\
[A-23]\
[A-24]\
[A-25]\
[B-1]\
[B-2]\
[B-3]\
[B-4]\
[B-5]\
[B-6]\
[B-7]\
[B-8]\
[B-9]\
[B-10]\
[B-11]\
[B-12]\
[B-13]\
[B-14]\
[B-15]\
[B-16]\
[B-17]\
[B-18]\
[B-19]\
[B-20]\
[B-21]\
[B-22]\
[B-23]\
[B-24]\
[B-25]\
[C-1]\
[C-2]\
[C-3]\
[C-4]\
[C-5]\
[C-6]\
[C-7]\
[C-8]\
[C-9]\
[C-10]\
[C-11]\
[C-12]\
[C-13]\
[C-14]\
[C-15]\
[C-16]\
[C-17]\
[C-18]\
[C-19]\
[C-20]\
[C-21]\
[C-22]\
[C-23]\
[C-24]\
[C-25]\
[D-1]\
[D-2]\
[D-3]\
[D-4]\
[D-5]\
[D-6]\
[D-7]\
[D-8]\
[D-9]\
[D-10]\
[D-11]\
[D-12]\
[D-13]\
[D-14]\
[D-15]\
[D-16]\
[D-17]\
[D-18]\
[D-19]\
[D-20]\
[D-21]\
[D-22]\
[D-23]\
[D-24]\
[D-25]\
[E-1]\
[E-2]\
[E-3]\
[E-4]\
[E-5]\
[E-6]\
[E-7]\
[E-8]\
[E-9]\
[E-10]\
[E-11]\
[E-12]\
[E-13]\
[E-14]\
[E-15]\
[E-16]\
[E-17]\
[E-18]\
[E-19]\
[E-20]\
[E-21]\
[E-22]\
[E-23]\
[E-24]\
[E-25]\
[F-1]\
[F-2]\
[F-3]\
[F-4]\
[F-5]\
[F-6]\
[F-7]\
[F-8]\
[F-9]\
[F-10]\
[F-11]\
[F-12]\
[F-13]\
[F-14]\
[F-15]\
[F-16]\
[F-17]\
[F-18]\
[F-19]\
[F-20]\
[F-21]\
[F-22]\
[F-23]\
[F-24]\
[F-25]\
[G-1]\
[G-2]\
[G-3]\
[G-4]\
[G-5]\
[G-6]\
[G-7]\
[G-8]\
[G-9]\
[G-10]\
[G-11]\
[G-12]\
[G-13]\
[G-14]\
[G-15]\
[G-16]\
[G-17]\
[G-18]\
[G-19]\
[G-20]\
[G-21]\
[G-22]\
[G-23]\
[G-24]\
[G-25]\
[H-1]\
[H-2]\
[H-3]\
[H-4]\
[H-5]\
[H-6]\
[H-7]\
[H-8]\
[H-9]\
[H-10]\
[H-11]\
[H-12]\
[H-13]\
[H-14]\
[H-15]\
[H-16]\
[H-17]\
[H-18]\
[H-19]\
[H-20]\
[H-21]\
[H-22]\
[H-23]\
[H-24]\
[H-25]\
[I-1]\
[I-2]\
[I-3]\
[I-4]\
[I-5]\
[I-6]\
[I-7]\
[I-8]\
[I-9]\
[I-10]\
[I-11]\
[I-12]\
[I-13]\
[I-14]\
[I-15]\
[I-16]\
[I-17]\
[I-18]\
[I-19]\
[I-20]\
[I-21]\
[I-22]\
[I-23]\
[I-24]\
[I-25]\
**ENDTAB1

//      TABLET2 menu.
//      Rows: J to R (9) 
//      Columns: 11       
//
***TABLET2
**TABLET2STD
// Row J View
^C^C_regen
'_zoom _e
'_zoom _a
'_zoom _w
'_zoom _p
[Draw]\
^C^C_box
^C^C_mtext
^C^C_circle
^C^C_line
^C^C
// Row K View
^C^C_regenall
'_dsviewer
'_zoom _c
'_zoom .5x
'_zoom 2x
[Draw]\
^C^C_sphere
^C^C_dtext
^C^C_donut
^C^C_ray
'_zoom ;
//  Row L View
'_attdisp
^C^C_ucsicon
^C^C_tilemode 1 
^C^C^P_mspace ^P
^C^C^P_pspace ^P
[Draw]\
^C^C_cylinder
^C^C_solid
^C^C_spline
^C^C_xline
'_zoom ;
// Row M View
^C^C_render
^C^C_hide
^C^C_vports
^C^C_vports
^C^C_view
[Draw]\
^C^C_cone
^C^C_3dface
^C^C_ellipse
^C^C_mline
'_zoom ;
//  Row N View
^C^C_scene
^C^C_shade
^C^C_plan
^C^C_vpoint
^C^C_ddvpoint
[Draw]\
^C^C_wedge
$I=IR_gardensSoft.image_3dobjects $I=IR_gardensSoft.*
^C^C_block
^C^C_pline
'_pan
// Row O View
^C^C_light
^C^C_shademode
//
'_-view _nwiso
'_-view _back
'_-view _neiso
[Draw]\
^C^C_torus
^C^C_revsurf
*^C^C_point
^C^C_3dpoly
'_pan
//  Row P  View
^C^C_rmat
^C^C_fog
//
'_-view _left
'_-view _top
'_-view _right
[Draw]\
^C^C_extrude
^C^C_tabsurf
^C^C_bhatch
^C^C_polygon
'_pan
//  Row Q View
^C^C_matlib
^C^C_background
//
'_-view _swiso
'_-view _front
'_-view _seiso
[Draw]\
^C^C_revolve
^C^C_rulesurf
^C^C_boundary
^C^C_rectang
'_redrawall
//  Row R  View
^C^C_setuv
^C^C_rpref
//
^C^C_toolbar
'_-view _bottom
'_3dorbit
[Draw]\
^C^C_qleader
^C^C_edgesurf
^C^C_region
^C^C_arc
'_redrawall
**ENDTAB2

//      TABLET3 menu.  
//      This tablet menu is 9 colums wide by 13 rows high.
//      The equivalent area on the tablet drawing shows an empty column followed by three colums
//      that are slightly narrower than the normal columns.
//      The 9 tablet menu columns are used as follows:
//      -  3 tablet menu columns for the blank column in the tablet drawing
//      -  2 tablet menu columns for each of the 3 narrow tablet drawing columns 
//
***TABLET3
**TABLET3STD
//  Row 1
\
\
\
<<135
<<135
<<90
<<90
<<45
<<45
//  Row 2
\
\
\
<<180
<<180
<\
<\
<<0
<<0
//  Row 3
\
\
\
<<225
<<225
<<270
<<270
<<315
<<315
//  Row 4
\
\
\
^H
^H
^H
^H
^H
^H
//  Row 5
\
\
\
7/8\
7/8\
/16\
/16\
/32\
/32\
//  Row 6
\
\
\
1/2\
1/2\
5/8\
5/8\
3/4\
3/4\
//  Row 7
\
\
\
1/8\
1/8\
1/4\
1/4\
3/8\
3/8\
//  Row 8
\
\
\
-\
-\
/\
/\
X\
X\
//  Row 9
\
\
\
@\
@\
'\
'\
"\
"\
//  Row 10
\
\
\
7\
7\
8\
8\
9\
9\
//  Row 11
\
\
\
4\
4\
5\
5\
6\
6\
//  Row 12
\
\
\
1\
1\
2\
2\
3\
3\
//  Row 13
\
\
\
0\
0\
.\
.\
,\
,\
**ENDTAB3

//      This is the TABLET4 menu.  
//      It has been updated for this release.
//
***TABLET4
**TABLET4STD
//  Row S
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
//  Row T Insert
^C^C_insertobj
^C^C_import
^C^C_image
^C^C_xref
^C^C_insert
[Tool]\
^C^C_area
'_dist
^C^C_draworder
'_spell
[Edit]\
^C^C_u
^C^C_cutclip
^C^C_copyclip
//  Snap
_parallel
_endpoint
_midpoint
_intersect
_appint
_center
_quadrant
_tangent
[File]\
^C^C_new
^C^C_open
//  Row U Format
'_ddptype
'_style
'_linetype
'_color
'_layer
[Tool]\
^C^C_massprop
^C^C_list
'_id
'_setvar
[Edit]\
^C^C_mredo 1
^C^C_pasteclip
^C^C_erase
// Snap
_from
_perpend
_insert
_node
_nearest
_extension
_none
'_+dsettings 2
[File]\
^C^C_qsave
^C^C_qsave
//  Row V Format
^C^C_rename
'_limits
'_thickness
'_units
^C^C_mlstyle
\
^C^C_saveimg
^C^C_replay
'_script
^C^C_appload
\
^C^C_measure
^C^C_divide
//
^C^C_erase
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
^C^C_offset
^C^C_array
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
\
^C^C_saveas
^C^C_pagesetup
//  Row W
^C^C_qdim
^C^C_qleader
^C^C_dimordinate
^C^C_dimaligned
^C^C_dimlinear
\
^C^C_ucs
^C^C_+ucsman 0
^C^C_+ucsman 1
'_dsettings
\
^C^C_dbconnect
^C^C_dbconnect
//
^C^C_lengthen
^C^C_trim
^C^C_extend
^C^C_break
^C^C_chamfer
^C^C_fillet
^C^C_3darray
^C^C_mirror3d
^C^C_rotate3d
\
^C^C_export
^C^C_plot
//  Row X
^C^C_tolerance
^C^C_dimcenter
^C^C_dimangular
^C^C_dimdiameter
^C^C_dimradius
\
^C^C_tablet
^C^C_group
^C^C_qselect
^C^C_find
\
'_adcenter
'_adcenter
//
^C^C_align
^C^C_union
^C^C_subtract
^C^C_intersect
^C^C_xclip
^C^C_xbind
^C^C_imageadjust
^C^C_transparency
^C^C_imageclip
\
^C^C_preview
^C^C_purge
//  Row Y
^C^C_dimedit
^C^C_dimtedit
^C^C_-dimstyle _apply
^C^C_dimoverride
'_dimstyle
\
'_help
^C^C_browser ;
^C^C_menuload
^C^C_options
\
^C^C_properties
^C^C_properties
//
'_matchprop
'_matchprop
^C^C_hatchedit
^C^C_pedit
^C^C_splinedit
^C^C_mledit
^C^C_attedit
^C^C_ddedit
^C^C_explode
\
^C^C_stylesmanager
^C^C_exit
**ENDTAB4

//
//   Where possible the ID name is the AutoCAD command name.
//   An ID is no more than 12 characters long.
//   Long command names are truncated (not abbreviated) to fit.
//   An ID names for a command opion appends the option to the command name:
//
//       Example:  the ID for Zoom Window is ID_ZoomWin
//
//   IDs are listed in alphabetical order.
//   Helps strings end with a colon, two spaces and the name of the command.
//

***HELPSTRINGS
ID_2doptim    [将视口设置为二维线框:  SHADEMODE]
ID_3darray    [创建三维阵列:   3DARRAY]
ID_3dclip     [启动 3DORBIT 命令并打开“调整剪裁平面”窗口:  3DCLIP]
ID_3dclipbk   [在三维动态观察器的“调整剪裁平面”窗口中打开或关闭后向剪裁平面:  DVIEW]
ID_3dclipfr   [在三维动态观察器的“调整剪裁平面”窗口中打开或关闭前向剪裁平面:  DVIEW]
ID_3dcorbit   [启动 3DORBIT 命令并在三维视图中激活连续观察:  3DCORBIT]
ID_3ddistanc  [启动 3DORBIT 命令并调整对象的显示距离:  3DDISTANCE]
ID_3dface     [创建三维面:   3DFACE]
ID_3dmesh     [创建自由形式的多边形网格:   3DMESH]
ID_3dorbit    [控制交互式观察三维对象:  3DORBIT]
ID_3dpan      [启动 3DORBIT 命令并允许水平或垂直拖动视图:  3DPAN]
ID_3dpoly     [在三维空间中创建多段线:   3DPOLY]
ID_3dsin      [输入 3D Studio 文件:   3DSIN]
ID_3dsurface  [用对话框创建三维曲面对象]
ID_3dswivel   [启动 3DORBIT 命令并模拟旋转相机的效果:  3DSWIVEL]
ID_3dviews    [将视图设置为预定义或已命名的视图]
ID_3dzoom     [启动 3DORBIT 命令并允许缩放视图:  3DZOOM]
ID_About      [显示关于本产品的信息:  ABOUT]
ID_Acisin     [输入 ACIS 文件:   ACISIN]
ID_AddPlotter [添加并配置打印机]
ID_AddPlStyle [创建打印样式表]
ID_Ai_box     [创建长方体表面多边形网格]
ID_Ai_cone    [创建圆锥面多边形网格]
ID_Ai_dish    [创建下半球面多边形网格]
ID_Ai_dome    [创建上半球面多边形网格]
ID_Ai_fms     [切换到浮动模型空间]
ID_Ai_molc    [将选定对象所在的图层置为当前图层]
ID_Ai_pyrami  [创建棱锥面或四面体表面多边形网格]
ID_Ai_sphere  [创建球面多边形网格]
ID_Ai_tiledv  [显示命名视口的布局选项:  +VPORTS]
ID_Ai_torus   [创建平行于当前 UCS 的 XY 平面的环形多边形网格]
ID_Ai_wedge   [创建直角楔形多边形网格，并使其倾斜面沿 X 轴正方向]
ID_Align      [在二维或三维中使对象与其他对象对齐:   ALIGN]
ID_Appload    [加载和卸载应用程序，定义要在启动时加载的应用程序:   APPLOAD]
ID_Arc        [创建圆弧:   ARC]
ID_Arc3point  [用三点创建圆弧:   ARC]
ID_ArcCeStAn  [用圆心、起点和包含角创建圆弧:   ARC]
ID_ArcCeStEn  [用圆心、起点和端点创建圆弧:   ARC]
ID_ArcCeStLe  [用圆心、起点和弦长创建圆弧:  ARC]
ID_ArcContin  [创建圆弧使其相切于上一次绘制的直线或圆弧:   ARC]
ID_ArcStCeAn  [用起点、圆心和包含角创建圆弧:  ARC]
ID_ArcStCeEn  [用起点、圆心和端点创建圆弧:   ARC]
ID_ArcStCeLe  [用起点、圆心和弦长创建圆弧:   ARC]
ID_ArcStEnAg  [用起点、端点和包含角创建圆弧:   ARC]
ID_ArcStEnDi  [用起点、端点和起点方向创建圆弧:   ARC]
ID_ArcStEnRa  [用起点、端点和半径创建圆弧:   ARC]
ID_Area       [计算对象或定义区域的面积和周长:   AREA]
ID_Array      [创建按指定方式排列的多个对象副本:   ARRAY]
ID_ASSIST     [打开“实时助手”窗口，按需自动提供上下文相关的信息: ASSIST]
ID_Attdef     [创建属性定义:  ATTDEF]
ID_AttdispNo  [保持每个属性当前的可见性设置:   ATTDISP]
ID_AttdispOf  [隐藏所有属性:   ATTDISP OFF]
ID_AttdispOn  [显示所有属性:   ATTDISP ON]
ID_AtteditGlo [编辑块的可变属性:   -ATTEDIT]
ID_AtteditSin [编辑块的可变属性:  ATTEDIT]
ID_Audit      [检查图形的完整性:   AUDIT]
ID_AUGI       [启动 Web 浏览器并显示用户组信息]
ID_AULPIDE    [启动 Visual LISP 开发环境:  VLISP]
ID_AULPLoad   [加载 AutoLISP 应用程序:  APPLOAD]
ID_Back       [定位到上一个超链接的文档:  HYPERLINKBACK]
ID_Backgroun  [设置场景的背景:   BACKGROUND]
ID_Base       [设置当前图形的插入基点:   BASE]
ID_Bhatch     [用图案填充封闭区域或选定对象:   BHATCH]
ID_Bmake      [从选定对象创建块定义:   BLOCK]
ID_BodyChk    [检查三维实体对象是否有效的 ACIS 实体:  SOLIDEDIT]
ID_BodyCln    [删除实体对象上所有冗余的边和顶点:  SOLIDEDIT]
ID_Boundary   [用封闭区域创建面域或多段线:   BOUNDARY]
ID_Box        [创建三维实体长方体:   BOX]
ID_Break      [在两点之间打断选定的对象:   BREAK]
ID_Browser    [启动系统注册表中定义的默认 Web 浏览器:   BROWSER]
ID_Camera     [允许设置不同的相机和目标位置:  CAMERA]
ID_Cancel     [取消命令]
ID_Chamfer    [给对象加倒角:   CHAMFER]
ID_Circle     [创建圆:   CIRCLE]
ID_Circle2pt  [用直径的两个端点创建圆:   CIRCLE]
ID_Circle3pt  [用圆周上的三个点创建圆:  CIRCLE]
ID_CircleDia  [用指定直径创建圆:   CIRCLE]
ID_CircleRad  [用指定半径创建圆:   CIRCLE]
ID_CircleTTR  [用指定半径创建圆使其相切于两个对象:   CIRCLE]
ID_CircleTTT  [创建相切于三个对象的圆:  CIRCLE]
ID_CleanScreen [打开和关闭清除屏幕模式: CLEANSCREENON]
ID_CKeyboard  [向命令指定键盘快捷键:  CUSTOMIZE]
ID_CMNonLast  [重复上一条命令]
ID_CMSelLast  [重复上一条命令]
ID_Cone       [创建三维实心圆锥体:  CONE]
ID_Content    [管理和插入块、外部参照和填充图案等内容:  ADCENTER]
ID_Copy       [复制对象:   COPY]
ID_Copybase   [带指定的基点复制对象:  COPYBASE]
ID_Copyclip   [将对象复制到 Windows 剪贴板:   COPYCLIP]
ID_Copylink   [将当前视图复制到 Windows 剪贴板以便链接到其他 OLE 应用程序:   COPYLINK]
ID_CreateLayout [用向导中提供的设置创建布局:  LAYOUTWIZARD]
ID_CToolbar   [显示、创建、重命名和删除工具栏，控制工具栏提示和按钮尺寸:  CUSTOMIZE]
ID_CPalette   [显示、创建、重命名和删除工具选项板:  CUSTOMIZE]
ID_CtrlColor  [设置新对象的默认颜色，编辑现有对象的颜色]
ID_CtrlLayer  [设置新对象的默认图层，编辑现有对象的图层，或者切换图层特性]
ID_CtrlLinet  [设置新对象的默认线型，编辑现有对象的线型]
ID_CtrlLineW  [设置新对象的默认线宽，修改现有对象的线宽]
ID_CtrlPStyl  [设置新对象的默认打印样式，编辑现有对象的打印样式]
ID_Cutclip    [将对象复制到 Windows 剪贴板并从图形删除该对象:   CUTCLIP]
ID_Cylinder   [创建三维实心圆柱体:   CYLINDER]
ID_dbConnect  [提供到外部数据库表的 AutoCAD 接口:  DBCONNECT]
ID_Ddcolor    [设置新对象的颜色:  COLOR]
ID_Ddedit     [编辑文字、标注文字和属性定义:  DDEDIT]
ID_Ddim       [创建和修改标注样式:   DIMSTYLE]
ID_Ddinsert   [向当前图形插入块或图形:  INSERT]
ID_Ddptype    [指定点对象的显示样式和大小:   DDPTYPE]
ID_Ddrename   [修改命名对象的名称:   RENAME]
ID_Ddrmodes   [设置栅格和捕捉、极轴追踪和对象捕捉模式:  DSETTINGS]
ID_Dducs      [管理已定义的用户坐标系:  +UCSMAN]
ID_Dducsp     [管理已定义的用户坐标系:  +UCSMAN]
ID_Ddview     [按名称保存和恢复视图:  VIEW]
ID_Ddvpoint   [设置三维观察方向:   DDVPOINT]
ID_Deselectall [从选择集中删除所有对象]
ID_DevHelp    [显示联机开发人员帮助]
ID_DevRes     [在默认浏览器中显示 Autodesk 网上资源指南站点:  BROWSER]
ID_DimAbove   [将标注文字移到尺寸线上方]
ID_Dimaligne  [创建对齐线性标注:   DIMALIGNED]
ID_Dimangula  [创建角度标注:   DIMANGULAR]
ID_Dimbaseli  [从上一个或选定标注的基线作连续的线性、角度或坐标标注:  DIMBASELINE]
ID_Dimcenter  [创建圆和圆弧的圆心标记或中心线:  DIMCENTER]
ID_Dimcontin  [从上一个或选定标注的第二条尺寸界线作连续的线性、角度或坐标标注:  DIMCONTINUE]
ID_Dimdiamet  [创建圆和圆弧的直径标注:  DIMDIAMETER]
ID_Dimedit    [编辑标注:   DIMEDIT]
ID_Dimedito   [使线性标注的尺寸界线倾斜:  DIMEDIT]
ID_DimHome    [将标注文字移回默认位置]
ID_Dimlinear  [创建线性标注:  DIMLINEAR]
ID_Dimordina  [创建坐标点标注:  DIMORDINATE]
ID_Dimoverri  [替代标注系统变量:   DIMOVERRIDE]
ID_DimPrec0   [将标注值设置为 0 位小数]
ID_DimPrec1   [将标注值设置为 1 位小数]
ID_DimPrec2   [将标注值设置为 2 位小数]
ID_DimPrec3   [将标注值设置为 3 位小数]
ID_DimPrec4   [将标注值设置为 4 位小数]
ID_DimPrec5   [将标注值设置为 5 位小数]
ID_DimPrec6   [将标注值设置为 6 位小数]
ID_Dimradius  [创建圆和圆弧的半径标注:   DIMRADIUS]
ID_DimSty2    [将选定标注的特性另存为新标注样式]
ID_DimSty3    [向选定的标注指定样式]
ID_DimSty4    [向选定的标注指定样式]
ID_DimSty5    [向选定的标注指定样式]
ID_DimSty6    [向选定的标注指定样式]
ID_DimSty7    [向选定的标注指定样式]
ID_DimSty8    [向选定的标注指定样式]
ID_DimSty9    [显示其他可用的标注样式]
ID_DimstyleA  [用当前标注样式更新标注对象:  -DIMSTYLE]
ID_Dimtedit   [移动和旋转标注文字:   DIMTEDIT]
ID_DimteditA  [将标注文字旋转一定角度:   DIMTEDIT]
ID_DimteditC  [标注文字置中:   DIMTEDIT]
ID_DimteditH  [将标注文字移回默认位置:   DIMTEDIT]
ID_DimteditL  [左对齐标注文字:   DIMTEDIT]
ID_DimteditR  [右对齐标注文字:   DIMTEDIT]
ID_DimTxtCen  [将标注文字移到中心位置]
ID_DimTxtMove0 [标注文字与尺寸线一起移动]
ID_DimTxtMove1 [标注文字与引线一起移动]
ID_DimTxtMove2 [单独移动标注文字]
ID_DimUpdate  [更新标注的样式:  DIMSTYLE]
ID_Dist       [测量两个点之间的距离和角度:   DIST]
ID_Divide     [将点对象或块沿对象的长度或周长等间隔排列:   DIVIDE]
ID_Donut      [创建实心的圆和环:  DONUT]
ID_DrawordeA  [强制使选定对象显示在参照对象之前:  DRAWORDER]
ID_DrawordeB  [强制使选定对象显示在所有对象之后:  DRAWORDER]
ID_DrawordeF  [强制使选定对象显示在所有对象之前:  DRAWORDER]
ID_Draworder  [修改图像和其他对象的显示顺序:   DRAWORDER]
ID_DrawordeU  [强制使选定对象显示在参照对象之后:  DRAWORDER]
ID_Dsviewer   [打开“鸟瞰视图”窗口:  DSVIEWER]
ID_Dtext      [输入文字的同时在屏幕上显示:   DTEXT]
ID_DWG_CLOSE  [关闭当前图形:  CLOSE]
ID_Dxbin      [输入特殊编码的二进制文件:  DXBIN]
ID_Edge       [修改三维面的边的可见性:   EDGE]
ID_EdgeColor  [修改实体对象上单个边的颜色:  SOLIDEDIT]
ID_EdgeCopy   [将实体对象上的三维边复制为圆弧、圆、椭圆、直线或样条曲线:  SOLIDEDIT]
ID_Edgesurf   [创建三维多边形网格:   EDGESURF]
ID_Ellipse    [创建椭圆或椭圆弧:   ELLIPSE]
ID_EllipseAr  [创建椭圆弧:  ELLIPSE]
ID_EllipseAx  [创建椭圆或椭圆弧:  ELLIPSE]
ID_EllipseCe  [用指定的中心点创建椭圆:  ELLIPSE]
ID_Enter      [完成命令、接受命令值以及轮换夹点模式]
ID_Erase      [从图形删除对象:   ERASE]
ID_Etransmit  [创建图形及其相关文件的传递集:  ETRANSMIT]
ID_Explode    [将复合对象分解为其部件对象:   EXPLODE]
ID_Export     [以其他文件格式保存对象:   EXPORT]
ID_Extend     [将对象延伸到另一对象:   EXTEND]
ID_Extrude    [通过拉伸现有二维对象来创建唯一实体原型:   EXTRUDE]
ID_FaceColor  [修改实体对象上单个面的颜色:  SOLIDEDIT]
ID_FaceCopy   [将实体对象上的面复制为面域或实体:  SOLIDEDIT]
ID_FaceDel    [删除面，包括实体对象上的圆角或倒角:  SOLIDEDIT]
ID_FaceExtru  [按指定高度或沿路径拉伸实体对象的选定面:  SOLIDEDIT]
ID_FaceMove   [按指定高度或沿路径移动实体对象的选定面:  SOLIDEDIT]
ID_FaceOffse  [按指定的距离或点等距偏移实体对象:  SOLIDEDIT]
ID_FaceRotat  [绕指定的轴旋转实体对象上的一个或多个面:  SOLIDEDIT]
ID_FaceTaper  [用指定的角度来倾斜实体对象的面:  SOLIDEDIT]
ID_Fillet     [给对象加圆角:   FILLET]
ID_Filter     [按过滤条件快速创建选择集:  QSELECT]
ID_Flat       [将视口设置为平面着色:  SHADEMODE]
ID_FlatEdges  [将视口设置为带边框平面着色:  SHADEMODE]
ID_Fog        [指定对象的能见距离:   FOG]
ID_Forward    [定位到下一个超链接的文档:  HYPERLINKFWD]
ID_From       [在命令中获取某个点相对于参照点的偏移:  FROM]
ID_Gouraud    [将视口设置为体着色:  SHADEMODE]
ID_GourEdges  [将视口设置为带边框体着色:  SHADEMODE]
ID_GripBase   [设置当前图形的插入基点:   BASE]
ID_GripCopy   [复制对象:   COPY]
ID_GripExit   [取消夹点编辑模式并返回到命令行:   EXIT]
ID_GripMirro  [创建对象的镜像图像副本:  MIRROR]
ID_GripMove   [将对象在指定方向上平移指定的距离:  MOVE]
ID_GripRefer  [设置参照点:  REFERENCE]
ID_GripRotat  [绕基点移动对象:  ROTATE]
ID_GripScale  [在 X、Y 和 Z 方向上同比放大或缩小对象:  SCALE]
ID_GripStret  [移动或拉伸对象:  STRETCH]
ID_GripUndo   [撤消上一次操作:  U]
ID_Group      [创建对象的命名选择集:   GROUP]
ID_Hatchedit  [修改现有的图案填充对象:   HATCHEDIT]
ID_Help       [显示联机帮助:   HELP]
ID_Hidden     [将视口设置为隐藏线:  SHADEMODE]
ID_Hide       [重生成不显示隐藏线的三维模型:  HIDE]
ID_HlnkBack   [定位到上一个超链接的文档:  HYPERLINKBACK]
ID_HlnkFwd    [定位到下一个超链接的文档:  HYPERLINKFWD]
ID_HlnkStop   [取消当前定位选择:  HYPERLINKSTOP]
ID_Hyperlink  [向对象附着超链接或修改现有的超链接:  HYPERLINK]
ID_Id         [显示点坐标:   ID]
ID_Image      [将多种格式的图像插入 AutoCAD 图形文件:  IMAGE]
ID_Imageadju  [控制图像的亮度、对比度和褪色度:   IMAGEADJUST]
ID_Imageatta  [将新的图像附着到当前图形:   IMAGEATTACH]
ID_Imageclip  [为图像对象创建新剪裁边界:   IMAGECLIP]
ID_Imagefram  [控制是否在视图中显示图像边框:  IMAGEFRAME]
ID_Imagequal  [控制图像显示质量:   IMAGEQUALITY]
ID_Import     [输入各种格式的文件:  IMPORT]
ID_ImpPlotSet [显示向导，以便将 PCP 和 PC2 配置文件打印设置输入到模型选项卡或当前布局:  PCINWIZARD]
ID_Imprint    [将几何图形压印到实体对象的面上:  SOLIDEDIT]
ID_Insertobj  [插入链接或嵌入对象:   INSERTOBJ]
ID_Interfere  [用两个或多个实体的公共部分创建三维组合实体:  INTERFERE]
ID_Intersect  [从实体或面域的交集创建组合实体或面域:   INTERSECT]
ID_Layer      [管理图层和图层特性:   LAYER]
ID_LayNew     [创建新的布局选项卡:  -LAYOUT]
ID_LayoutWiz  [创建新的布局选项卡并指定页面和打印设置:  LAYOUTWIZARD]
ID_LayTemp    [显示“选择文件”对话框，可从中选择新布局所基于的现有样板:  -LAYOUT]
ID_Leader     [创建引线和注释:  QLEADER]
ID_Lengthen   [修改对象的长度和圆弧的包含角:  LENGTHEN]
ID_Light      [管理光源和光照效果:   LIGHT]
ID_Limits     [设置和控制当前模型或布局选项卡中栅格的显示范围:  LIMITS]
ID_Line       [创建直线段:   LINE]
ID_Linetype   [加载并设置线型:  LINETYPE]
ID_Linewt     [设置当前线宽、线宽显示选项和线宽单位:   LWEIGHT]
ID_Links      [更新、修改和取消现有的 OLE 链接:   OLELINKS]
ID_List       [显示选定对象的数据库信息:   LIST]
ID_Lsedit     [编辑配景对象:   LSEDIT]
ID_Lslib      [管理配景对象库:   LSLIB]
ID_Lsnew      [向图形中添加真实的配景，例如树木和灌木:   LSNEW]
ID_MARKUP     [插入 RML 文件中的标记:  RMLIN]
ID_Massprop   [计算并显示面域或实体的质量特性:   MASSPROP]
ID_Matchprop  [将选定对象的特性应用到其他对象:  MATCHPROP]
ID_Matlib     [从材质库输入材质或向其输出材质:   MATLIB]
ID_Measure    [将点对象或块在对象上指定间隔处放置:   MEASURE]
ID_Menuload   [加载部分菜单文件:   MENULOAD]
ID_Mirror     [创建对象的镜像图像副本:   MIRROR]
ID_Mirror3d   [创建对象相对于某一平面的镜像图像副本:   MIRROR3D]
ID_Mledit     [编辑多条平行线:   MLEDIT]
ID_Mline      [创建多条平行线:   MLINE]
ID_Mlstyle    [管理多线样式:   MLSTYLE]
ID_Modify     [控制现有对象的特性:  PROPERTIES]
ID_Move       [将对象在指定方向上平移指定的距离:   MOVE]
ID_MRU        [打开此图形]
ID_Mtedit     [打开多行文字编辑器，编辑选定的多行文字对象:  MTEDIT]
ID_Mtext      [创建多行文字对象:  MTEXT]
ID_New        [创建新的图形文件:   NEW]
ID_QNew       [创建空白的图形文件:  QNEW]
ID_NewLayout  [创建和修改图形的布局选项卡:  LAYOUT]
ID_Offset     [创建同心圆、平行线和等距曲线:   OFFSET]
ID_Open       [打开现有的图形文件:   OPEN]
ID_Osnap      [设置执行对象捕捉模式:  OSNAP]
ID_OsnapAppa  [捕捉到两个对象的外观交点:   APPINT]
ID_OsnapCent  [捕捉到圆弧、圆、椭圆或椭圆弧的中心点:  CEN]
ID_OsnapEndp  [捕捉到对象的最近端点:  ENDP]
ID_OsnapExte  [捕捉到圆弧或直线的延长线:  EXT]
ID_OsnapInse  [捕捉到文字、块或属性等对象的插入点:  INS]
ID_OsnapInte  [捕捉到两个对象的交点:  INT]
ID_OsnapMidp  [捕捉到对象的中点:  MID]
ID_OsnapNear  [捕捉到对象的最近点:  NEA]
ID_OsnapNode  [捕捉到点对象:   NOD]
ID_OsnapNone  [禁止对当前选择执行对象捕捉:  NON]
ID_OsnapPara  [捕捉到指定直线的平行线:  PAR]
ID_OsnapPerp  [捕捉到垂直于对象的点:  PER]
ID_OsnapQuad  [捕捉到圆弧、圆、椭圆或椭圆弧的象限点:  QUA]
ID_OsnapTang  [捕捉到圆弧、圆、椭圆、椭圆弧或样条曲线的切点:  TAN]
ID_Pan        [在当前视口中移动视图:  PAN]
ID_PanDown    [向下移动视图:  PAN]
ID_PanLeft    [向左移动视图:  PAN]
ID_PanPick    [将视图移动指定的距离:  -PAN]
ID_PanRight   [向右移动视图:  PAN]
ID_PanUp      [向上移动视图:  PAN]
ID_PartialOp  [向局部打开的图形中加载几何图形:  PARTIALOAD]
ID_Pastebloc  [将复制的块粘贴到新图形中:  PASTEBLOCK]
ID_Pasteclip  [插入 Windows 剪贴板的数据:  PASTECLIP]
ID_Pastehlnk  [向选定的对象附着超链接:  PASTEASHYPERLINK]
ID_Pasteorig  [用原图形中的坐标将复制的对象粘贴到新图形中:  PASTEORIG]
ID_Pastesp    [插入 Windows 剪贴板的数据并控制数据格式:  PASTESPEC]
ID_Pedit      [编辑多段线和三维多边形网格:   PEDIT]
ID_PenSetting [创建颜色相关打印样式表:  R14PENWIZARD]
ID_PlanCurre  [显示指定的用户坐标系的平面视图:  PLAN]
ID_PlanUCS    [显示以前保存的用户坐标系的平面视图:  PLAN]
ID_PlanWorld  [显示世界坐标系的平面视图:  PLAN]
ID_Pline      [创建二维多段线:  PLINE]
ID_PlotMgr    [显示“打印机管理器”，可从其中启动“添加打印机”向导和打印机配置编辑器:  PLOTTERMANAGER]
ID_PlotSetup  [指定每个新布局的布局页面、打印设备、图纸尺寸和设置:  PAGESETUP]
ID_PlotStyle  [设置新对象的当前打印样式，或向选定对象指定打印样式:  PLOTSTYLE]
ID_PlotStyMgr [提供对“添加打印样式表”向导和打印样式表编辑器的访问:  STYLESMANAGER]
ID_Website    [在默认浏览器中显示 Autodesk 网站:  BROWSER]
ID_PointFilx  [指定 .X 点过滤器:   .X]
ID_PointFily  [指定 .Y 点过滤器:   .Y]
ID_PointFilz  [指定 .Z 点过滤器:   .Z]
ID_PointFixy  [指定 .XY 点过滤器:   .XY]
ID_PointFixz  [指定 .XZ 点过滤器:   .XZ]
ID_PointFiyz  [指定 .YZ 点过滤器:   .YZ]
ID_PointMult  [创建多个点对象:  POINT]
ID_PointSing  [创建点对象:  POINT]
ID_Polygon    [创建等边闭合多段线:   POLYGON]
ID_Preferenc  [自定义设置:  OPTIONS]
ID_Preview    [模拟图形的打印效果:   PREVIEW]
ID_Print      [将图形打印到绘图仪、打印机或文件:  PLOT]
ID_ProdSuppSafe   [启动 Web 浏览器并显示产品支持信息]
ID_Props      [设置和显示当前图形的文件属性:  DWGPROPS]
ID_Pub        [将图形发布到 DWF 文件或打印机:  PUBLISH]
ID_Publish    [创建包括选定图形的图像的网页:  PUBLISHTOWEB]
ID_Purge      [从图形中删除未使用的块定义、图层等项目:  PURGE]
ID_QDim       [快速创建标注:  QDIM]
ID_Qselect    [按过滤条件快速创建选择集:  QSELECT]
ID_Ray        [创建单向无限长的线:   RAY]
ID_Recover    [修复损坏的图形:   RECOVER]
ID_Rectang    [创建矩形多段线:  RECTANG]
ID_Redo       [恢复上一个用 UNDO 或 U 命令放弃的效果:   REDO]
ID_Redrawall  [刷新所有视口的显示:   REDRAWALL]
ID_RefAdd     [从宿主图形向参照编辑工作集传输对象:  REFSET]
ID_RefDscrd   [放弃对参照编辑工作集的修改:  REFCLOSE]
ID_RefEditor  [选择要进行在位编辑的块或外部参照:  REFEDIT]
ID_RefRemove  [从参照编辑工作集向宿主图形传输对象:  REFSET]
ID_RefSave    [保存对参照编辑工作集的修改:  REFCLOSE]
ID_Regen      [从图形数据库重生成整个图形:  REGEN]
ID_RegenAll   [重生成图形并刷新所有视口:   REGENALL]
ID_Region     [将包含封闭区域的对象转换为面域对象:  REGION]
ID_Render     [创建三维线框或实体模型的照片级真实感着色图像:   RENDER]
ID_Replay     [显示 BMP、TGA 或 TIFF 图像:   REPLAY]
ID_Revcloud   [创建连续圆弧的多段线构成云线形:  REVCLOUD]
ID_Revolve    [绕轴旋转二维对象以创建实体:   REVOLVE]
ID_Revsurf    [绕选定轴创建旋转曲面:   REVSURF]
ID_Rmat       [管理渲染材质:   RMAT]
ID_Rotate     [绕基点旋转对象:  ROTATE]
ID_Rotate3d   [绕三维轴转动对象:   ROTATE3D]
ID_Rpref      [设置渲染系统配置:   RPREF]
ID_Rulesurf   [在两条曲线之间创建直纹曲面:   RULESURF]
ID_Save       [保存当前图形:  QSAVE]
ID_Saveas     [以新文件名保存当前图形的副本:  SAVEAS]
ID_Saveimg    [将渲染图像保存到文件:   SAVEIMG]
ID_Scale      [在 X、Y 和 Z 方向上同比放大或缩小对象:  SCALE]
ID_Scene      [管理模型空间场景:   SCENE]
ID_Script     [执行脚本文件中的命令序列:  SCRIPT]
ID_Section    [用平面和实体的截面创建面域:   SECTION]
ID_SendMail   [将当前图形文件作为电子邮件附件或传真进行发送:  SENDMAIL]
ID_Separate   [将不连续的三维实体对象分割为独立的三维实体对象:  SOLIDEDIT]
ID_Setuv      [将材质映射到对象上:   SETUV]
ID_Setvar     [列出系统变量或修改变量值:   SETVAR]
ID_Shell      [以指定的厚度在实体对象上创建中空的薄壁:  SOLIDEDIT]
ID_Slice      [用平面剖切一组实体:   SLICE]
ID_Soldraw    [在用 SOLVIEW  命令创建的视口中生成轮廓图和剖视图:   SOLDRAW]
ID_Solid      [创建实心多边形:   SOLID]
ID_Solprof    [创建三维实体的轮廓图像:   SOLPROF]
ID_Solview    [创建浮动视口来使用正投影法生成三维实体及体对象的多面视图和剖视图:   SOLVIEW]
ID_Spell      [检查选定文字的拼写:  SPELL]
ID_Sphere     [创建三维实心球体:   SPHERE]
ID_Spline     [创建非一致有理 B 样条 (NURBS) 曲线:  SPLINE]
ID_Splinedit  [编辑样条曲线或样条曲线拟合多段线:  SPLINEDIT]
ID_Stats      [显示渲染的统计信息:   STATS]
ID_Status     [显示图形的统计信息、模式和范围:   STATUS]
ID_Stop       [取消当前定位选择:  HYPERLINKSTOP]
ID_Stretch    [移动或拉伸对象:   STRETCH]
ID_Style      [在图形中创建、修改或设置命名文字样式:  STYLE]
ID_Subtract   [用差集创建组合面域或实体:   SUBTRACT]
ID_Support    [提供技术支持和疑难解答提示]
ID_TabletCal  [用图形的坐标系校准数字化仪:  TABLET]
ID_TabletCfg  [指定或重排数字化仪菜单区域:  TABLET]
ID_TabletOff  [关闭数字化仪模式:  TABLET]
ID_TabletOn   [打开数字化仪模式:  TABLET]
ID_Tabsurf    [沿方向矢量和轮廓曲线创建平移曲面:   TABSURF]
ID_TbCadStd   [CAD 标准工具栏]
ID_TbDimensi  [标注工具栏]
ID_TbDraw     [绘图工具栏]
ID_TbExtdb    [外部数据库工具栏]
ID_TbInquiry  [查询工具栏]
ID_TbInsert   [插入工具栏]
ID_TbLayer    [“图层”工具栏]
ID_TbLayouts  [布局工具栏]
ID_TbModifII  [修改 II 工具栏]
ID_TbModify   [修改工具栏]
ID_TbObjectP  [对象特性工具栏]
ID_TbOrbit    [动态观察工具栏]
ID_TbOsnap    [对象捕捉工具栏]
ID_TbRefedit  [参照编辑工具栏]
ID_TbReferen  [参照工具栏]
ID_TbRender   [渲染工具栏]
ID_TbShading  [着色工具栏]
ID_TbSolids   [实体工具栏]
ID_TbSolids2  [实体编辑工具栏]
ID_TbStandar  [标准工具栏]
ID_TbStyles   [“样式”工具栏]
ID_TbSurface  [曲面工具栏]
ID_TbText     [文字工具栏]
ID_TbUcs      [UCS 工具栏]
ID_TbUcsName  [UCS II 工具栏]
ID_TbViewpoi  [视点工具栏]
ID_TbVpCreat  [视口创建工具栏]
ID_TbWeb      [Web 工具栏]
ID_TbZoom     [缩放工具栏]
ID_TextFind   [查找、替换、选择或缩放到指定的文字:  FIND]
ID_Textscr    [打开文本窗口:  TEXTSCR]
ID_Thickness  [设置当前三维厚度:   THICKNESS]
ID_Time       [显示当前图形的日期和时间统计信息:  TIME]
ID_TmplLayou  [插入基于现有布局样板的新布局:  LAYOUT]
ID_Tolerance  [创建形位公差:   TOLERANCE]
ID_Toolbar    [显示、隐藏和自定义工具栏:   TOOLBAR]
ID_Torus      [创建圆环形实体:   TORUS]
ID_TPalette   [显示或隐藏工具选项板窗口:  TOOLPALETTES]
ID_Tracking   [创建对象捕捉所使用的临时点:   TT]
ID_Transpare  [控制图像的背景像素是否透明:   TRANSPARENCY]
ID_Trim       [用其他对象定义的剪切边修剪对象:   TRIM]
ID_U          [撤消上一次操作:  U]
ID_Ucs        [管理用户坐标系:   UCS]
ID_Ucs3point  [指定新 UCS 的原点及 X 和 Y 轴的方向:  UCS]
ID_UcsApply   [向选定的视口应用当前 UCS:  UCS]
ID_UcsBack    [指定后视 UCS 方向:  UCS]
ID_UcsBottom  [指定仰视 UCS 方向:  UCS]
ID_UcsCombo   [修改 UCS]
ID_UcsFace    [基于选定的面定义新坐标系:  UCS]
ID_UcsFront   [指定主视 UCS 方向:  UCS]
ID_UcsiconOn  [启用坐标系图标:   UCSICON]
ID_UcsiconOr  [在用户坐标系的原点显示 UCS 图标:  UCSICON]
ID_UcsiconPr  [控制 UCS 图标的样式、大小和颜色:  UCSICON]
ID_UcsLeft    [指定左视 UCS 方向:  UCS]
ID_UcsMove    [移动已定义的 UCS:  UCS]
ID_UcsObject  [基于选定对象定义新坐标系:  UCS]
ID_UcsOrigin  [移动原点来定义新的 UCS:  UCS]
ID_UcsPrevio  [恢复上一个 UCS:  UCS]
ID_UcsRight   [指定右视 UCS 方向:  UCS]
ID_UcsTop     [指定俯视 UCS 方向:  UCS]
ID_UcsView    [建立新的坐标系使其 XY 平面平行于屏幕:  UCS]
ID_UcsWorld   [将 UCS 设置为世界坐标系:  UCS]
ID_UcsXAxRot  [绕 X 轴旋转当前 UCS:  UCS]
ID_UcsYAxRot  [绕 Y 轴旋转当前 UCS:  UCS]
ID_UcsZAxRot  [绕 Z 轴旋转当前 UCS:  UCS]
ID_UcsZAxVec  [用拉伸正 Z 轴的方法定义 UCS:  UCS]
ID_Union      [用并集创建组合面域或实体:   UNION]
ID_Units      [控制坐标和角度的显示格式和精度:   UNITS]
ID_VBAIDE     [显示 Visual Basic 编辑器:  VBAIDE]
ID_VBALoad    [在当前 AutoCAD 任务中加载全局 VBA 工程:  VBALOAD]
ID_VBAMan     [加载、卸载、保存、创建、嵌入和提取 VBA 工程:  VBAMAN]
ID_VBARun     [运行 VBA 宏:  VBARUN]
ID_VpClip     [剪裁图纸空间视口:  VPCLIP]
ID_VpConvert  [将对象转换为图纸空间视口:  -VPORTS]
ID_VpDialog   [显示“视口”对话框:  VPORTS]
ID_VpointBac  [将视点设置在后面:  VIEW]
ID_VpointBot  [将视点设置在下面:  VIEW]
ID_VpointFro  [将视点设置在前面:  VIEW]
ID_VpointLef  [将视点设置在左面:  VIEW]
ID_VpointNE   [将视点设置为东北等轴测:  VIEW]
ID_VpointNW   [将视点设置为西北等轴测:  VIEW]
ID_VpointRig  [将视点设置在右面:  VIEW]
ID_VpointSE   [将视点设置为东南等轴测:  VIEW]
ID_VpointSW   [将视点设置为西南等轴测:  VIEW]
ID_VpointTop  [将视点设置在上面:  VIEW]
ID_VpointTri  [在模型空间中显示定义观察方向的坐标球和三轴架:   VPOINT]
ID_Vport_asdisp [指定视口按其显示形式打印:  -VPORTS]
ID_Vport_dispoff [关闭视口，使其对象不可见:  -VPORTS]
ID_Vport_dispon [打开视口，激活视口并使其对象可见:  -VPORTS]
ID_Vport_hidden [指定视口打印线框，而不管当前显示设置:  -VPORTS]
ID_Vport_lockoff [解锁当前视口:  -VPORTS]
ID_Vport_lockon [锁定当前视口。类似于图层锁定:  -VPORTS]
ID_Vport_render [指定视口打印渲染，而不管当前显示设置:  -VPORTS]
ID_Vport_wframe [指定视口打印线框，而不管当前显示设置:  -VPORTS]
ID_VportClip  [剪裁视口对象:  VPCLIP]
ID_Vports2    [创建两个相同视口:  -VPORTS]
ID_Vports3    [创建三个视口:  -VPORTS]
ID_Vports4    [创建四个大小相同的视口:  -VPORTS]
ID_VportsDel  [指定闭合的多段线、椭圆、样条曲线、面域或圆，以转换为视口:  -VPORTS]
ID_VportsJoi  [将两个相邻视口合并为一个大视口:  -VPORTS]
ID_VportsRes  [用指定的点创建不规则形状的视口:  -VPORTS]
ID_VportsSav  [用指定的名称打开新视口:  +VPORTS]
ID_VportsSin  [用活动视口中的视图把图形恢复为单视口视图:   VPORTS]
ID_VpPoly     [用指定的点创建不规则形状的视口:  -VPORTS]
ID_VPScale    [设置新视口的视口比例，编辑现有视口的视口比例]
ID_VpSingle   [创建单个图纸空间视口:  -VPORTS]
ID_Wedge      [创建三维实体使其倾斜面沿 X 轴正向:   WEDGE]
ID_Wipeout    [创建擦除对象:  WIPEOUT]
ID_Wireframe  [将视口设置为三维线框:  SHADEMODE 3]
ID_Wmfin      [输入 Windows 图元文件格式的文件:  WMFIN]
ID_Xattach    [将外部参照附着到当前图形:   XATTACH]
ID_Xbind      [将外部参照依赖符号绑定到当前图形:  XBIND]
ID_Xclip      [定义外部参照或块的剪裁边界，设置前后剪裁平面:   XCLIP]
ID_Xclipfram  [控制外部参照或块的剪裁边界的可见性:  XCLIPFRAME]
ID_Xline      [创建无限长的线:   XLINE]
ID_XOpen      [在新图形窗口中打开外部参照:  XOPEN]
ID_Xref       [控制图形文件的外部参照:   XREF]
ID_XrefClip   [定义外部参照或块的剪裁边界以及设置前后剪裁平面:  XCLIP]
ID_ZoomAll    [显示图形范围或栅格界限:  ZOOM]
ID_ZoomCente  [显示由中心点及比例或高度指定的视图:  ZOOM]
ID_ZoomDynam  [缩放显示图形的生成部分:  ZOOM]
ID_ZoomExten  [显示图形范围:  ZOOM]
ID_ZoomIn     [放大显示对象的外观尺寸:  ZOOM]
ID_ZoomOut    [缩小显示对象的外观尺寸:  ZOOM]
ID_ZoomPrevi  [显示上一个视图:  ZOOM]
ID_ZoomRealt  [放大或缩小显示当前视口中对象的外观尺寸:  ZOOM]
ID_ZoomScale  [按指定的比例缩放显示:  ZOOM]
ID_ZoomWindo  [按指定的矩形窗口缩放显示区域:  ZOOM]
ID_BreakSele  [在一点打断选定的对象:  BREAK]
ID_LayerP     [恢复上一个图层设置:  LAYERP]
ID_Dimreasso  [将选定的标注关联或重新关联到对象或对象上的点:  DIMREASSOCIATE]
ID_Scaletext  [缩放选定的文字对象:  SCALETEXT]
ID_Justifyte  [设置选定文字的对正方式:  JUSTIFYTEXT]
ID_Spacetran  [将距离或高度在模型空间和图纸空间之间转换:  SPACETRANS]
ID_Standards  [为当前图形配置 CAD 标准:  STANDARDS]
ID_CheckStan  [检查当前图形是否符合其 CAD 标准:  CHECKSTANDARDS]
ID_LayTrans   [转换图层的名称和特性:  LAYTRANS]
ID_BattMan    [管理块定义上的属性:  BATTMAN]
ID_AttSync    [更新块插入，以反映块定义上新增和更改的属性:  ATTSYNC]
ID_EAttExt    [从块上将属性提取到单独的文件中:  EATTEXT]
ID_EAttEdit   [编辑块插入上的属性:  EATTEDIT]
ID_Blockdsc   [修改与块定义关联的文字说明:  BLOCK]
ID_SelAll     [选择解冻图层上的所有对象]
ID_BupdateA   [为 AutoCAD 设计中心中显示的块生成预览图像:  BLOCKICON]
ID_Ai_propch  [控制现有对象的特性:  PROPERTIES]
ID_WhatsNew   [描述本产品中的新特性]
ID_EditMNU    [打开当前菜单 (MNS) 文件进行编辑]
ID_EditPGP    [打开 IR_gardensSoft.pgp 文件进行编辑]
ID_TrainingSafe   [启动 Web 浏览器并显示此产品培训的相关链接]
ID_CustomSafe     [启动 Web 浏览器并显示特定产品自定义信息的链接]
ID_TbDrawOrd [“绘图次序”工具栏]
ID_BringFrnt [强制使选定对象显示在所有其他对象之前: DRAWORDER]
ID_SendBack  [强制使选定对象显示在所有其他对象之后: DRAWORDER]
ID_BringAbov [强制使选定对象显示在参照对象之前: DRAWORDER]
ID_SendUnder [强制使选定对象显示在参照对象之后: DRAWORDER]

//
//  Keyboard Accelerators
//
//  If a keyboard accelerator is preceded by an ID string that references a menu item
//  in a pull-down menu, then the keyboard accelerator will run the command referenced
//  by that menu item.  The additonal keyword "TOOLBAR+" restricts the same search to the 
//  Toolbar section while "INTERNAL+" matches those commands provided on the Commands
//  page of the Customize dialog.
//
***ACCELERATORS
// Bring up hyperlink dialog
ID_Hyperlink [CONTROL+"K"]
// Toggle Orthomode
[CONTROL+"L"]^O
// Next Viewport
[CONTROL+"R"]^V
ID_Copyclip  [TOOLBAR+CONTROL+"C"]
ID_New       [TOOLBAR+CONTROL+"N"]
ID_Open      [TOOLBAR+CONTROL+"O"]
ID_Print     [TOOLBAR+CONTROL+"P"]
ID_Save      [TOOLBAR+CONTROL+"S"]
ID_Pasteclip [TOOLBAR+CONTROL+"V"]
ID_Cutclip   [TOOLBAR+CONTROL+"X"]
ID_Redo      [TOOLBAR+CONTROL+"Y"]
ID_U         [INTERNAL+CONTROL+"Z"]
ID_Modify    [TOOLBAR+CONTROL+"4"]
ID_Content   [TOOLBAR+CONTROL+"5"]
ID_dbConnect [TOOLBAR+CONTROL+"6"]
ID_DrawRoad  [TOOLBAR+CONTROL+"D"]
ID_CreatePolt  [TOOLBAR+CONTROL+"Q"]
ID_SAVEVIEWWINDOW  [TOOLBAR+CONTROL+"1"]
ID_MANVIEWWINDOW  [TOOLBAR+CONTROL+"2"]
ID_DrawArch  [TOOLBAR+CONTROL+"3"]
ID_StartGalleryCenter [TOOLBAR+CONTROL+"T"] 
ID_OPENHCADHELP    [TOOLBAR+CONTROL+"F1"]
ID_OpenHCADReadme  [TOOLBAR+CONTROL+"F2"]
ID_OpenHCADGF	   [TOOLBAR+CONTROL+"F3"]
ID_VBARun    [ALT+"F8"]	
ID_VBAIDE    [ALT+"F11"]
[CONTROL+"H"]+
'_setvar;pickstyle;$M=$(if,$(eq,$(getvar,pickstyle),0),1,$(if,$(eq,$(getvar,pickstyle),1),0,+
$(if,$(eq,$(getvar,pickstyle),2),3,2)))
